[PATCH v9 3/4] arm64: dts: qcom: sc7280: Add support for camss
Vikram Sharma
quic_vikramsa at quicinc.com
Tue Dec 17 05:39:54 PST 2024
Add changes to support the camera subsystem on the SC7280.
Signed-off-by: Suresh Vankadara <quic_svankada at quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa at quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 178 +++++++++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 55db1c83ef55..a893aade8165 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4426,6 +4426,184 @@ cci1_i2c1: i2c-bus at 1 {
};
};
+ camss: isp at acb3000 {
+ compatible = "qcom,sc7280-camss";
+
+ reg = <0x0 0x0acb3000 0x0 0x1000>,
+ <0x0 0x0acba000 0x0 0x1000>,
+ <0x0 0x0acc1000 0x0 0x1000>,
+ <0x0 0x0acc8000 0x0 0x1000>,
+ <0x0 0x0accf000 0x0 0x1000>,
+ <0x0 0x0ace0000 0x0 0x2000>,
+ <0x0 0x0ace2000 0x0 0x2000>,
+ <0x0 0x0ace4000 0x0 0x2000>,
+ <0x0 0x0ace6000 0x0 0x2000>,
+ <0x0 0x0ace8000 0x0 0x2000>,
+ <0x0 0x0acaf000 0x0 0x4000>,
+ <0x0 0x0acb6000 0x0 0x4000>,
+ <0x0 0x0acbd000 0x0 0x4000>,
+ <0x0 0x0acc4000 0x0 0x4000>,
+ <0x0 0x0accb000 0x0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_ICP_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_2_CLK>,
+ <&camcc CAM_CC_IFE_2_AXI_CLK>,
+ <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_2_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "icp_ahb",
+ "vfe0",
+ "vfe0_axi",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1",
+ "vfe1_axi",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2",
+ "vfe2_axi",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_0";
+
+ iommus = <&apps_smmu 0x800 0x4e0>;
+
+ power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+ <&camcc CAM_CC_IFE_1_GDSC>,
+ <&camcc CAM_CC_IFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ };
+
+ port at 1 {
+ reg = <1>;
+ };
+
+ port at 2 {
+ reg = <2>;
+ };
+
+ port at 3 {
+ reg = <3>;
+ };
+
+ port at 4 {
+ reg = <4>;
+ };
+ };
+ };
+
camcc: clock-controller at ad00000 {
compatible = "qcom,sc7280-camcc";
reg = <0 0x0ad00000 0 0x10000>;
--
2.25.1
More information about the linux-arm-kernel
mailing list