[PATCH v4 5/7] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3

[Wasim Nazir]

Add device tree support for QCS9075 Ride & Ride-r3 boards.

QCS9075 lacks the safety monitoring features of Safety-Island (SAIL)
subsystem which is available in QCS9100, and it affects thermal
management.

Also, between ride and ride-r3 ethernet phy is different.
Ride uses 1G ethernet phy while ride-r3 uses 2.5G ethernet phy.

Signed-off-by: Wasim Nazir <quic_wasimn at quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile            |  2 +
 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts | 46 ++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs9075-ride.dts    | 46 ++++++++++++++++++++
 3 files changed, 94 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-ride.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 78613a1bd34a..41cb2bbd3472 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -118,6 +118,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-rb8.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs9075-ride-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
new file mode 100644
index 000000000000..d9a8956d3a76
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9075-ride-r3.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "sa8775p-ride.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS9075 Ride Rev3";
+	compatible = "qcom,qcs9075-ride-r3", "qcom,qcs9075", "qcom,sa8775p";
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+};
+
+&ethernet1 {
+	phy-mode = "2500base-x";
+};
+
+&mdio {
+	compatible = "snps,dwmac-mdio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sgmii_phy0: phy at 8 {
+		compatible = "ethernet-phy-id31c3.1c33";
+		reg = <0x8>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
+	};
+
+	sgmii_phy1: phy at 0 {
+		compatible = "ethernet-phy-id31c3.1c33";
+		reg = <0x0>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs9075-ride.dts b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
new file mode 100644
index 000000000000..3b524359a72d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9075-ride.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "sa8775p-ride.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS9075 Ride";
+	compatible = "qcom,qcs9075-ride", "qcom,qcs9075", "qcom,sa8775p";
+};
+
+&ethernet0 {
+	phy-mode = "sgmii";
+};
+
+&ethernet1 {
+	phy-mode = "sgmii";
+};
+
+&mdio {
+	compatible = "snps,dwmac-mdio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sgmii_phy0: phy at 8 {
+		compatible = "ethernet-phy-id0141.0dd4";
+		reg = <0x8>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
+	};
+
+	sgmii_phy1: phy at a {
+		compatible = "ethernet-phy-id0141.0dd4";
+		reg = <0xa>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
+	};
+};
--
2.47.0