[PATCH 2/2] dt-bindings: media: imx219: Describe sensor address using the reg property

[David Heidelberg]

Use the reg property instead of text in the description.
Drop useless description of reg property.

Signed-off-by: David Heidelberg <david at ixit.cz>
---
 Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git ./Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml ./Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
index 8b23e5fc6a24..066eeb7af5e3 100644
--- ./Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
+++ ./Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
@@ -12,7 +12,7 @@ maintainers:
 description: |-
   The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
   with an active array size of 3280H x 2464V. It is programmable through
-  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  I2C interface.
   Image data is sent through MIPI CSI-2, which is configured as either 2 or
   4 data lanes.
 
@@ -21,8 +21,7 @@ properties:
     const: sony,imx219
 
   reg:
-    description: I2C device address
-    maxItems: 1
+    const: 0x10
 
   clocks:
     maxItems: 1
-- 
2.45.2