[net v2] net: wwan: t7xx: Fix FSM command timeout issue

[Jinjian Song]

From: Sergey Ryazanov <ryazanov.s.a at gmail.com>

>> Fixes: d785ed945de6 ("net: wwan: t7xx: PCIe reset rescan")
>
>The completion waiting was introduced in a different commit. I believe, 
>the fix tag should be 13e920d93e37 ("net: wwan: t7xx: Add core components")
>

Got it.

[...]
>>   	if (cmd->flag & FSM_CMD_FLAG_WAIT_FOR_COMPLETION) {
>>   		*cmd->ret = result;
>
>The memory for the result storage is allocated on the stack as well. And 
>writing it unconditionally can cause unexpected consequences.
>

Got it.

[...]
>>   		wait_ret = wait_for_completion_timeout(&done,
>>   						       msecs_to_jiffies(FSM_CMD_TIMEOUT_MS));
>> -		if (!wait_ret)
>> +		if (!wait_ret) {
>> +			cmd->done = NULL;
>
>We cannot access the command memory here, since fsm_finish_command() 
>could release it already.
>

Got it.

[...]
>Here we have an ownership transfer problem and a driver author has tried 
>to solve it, but as noticed, we are still experiencing issues in case of 
>timeout.
>
>The command completion routine should not release the command memory 
>unconditionally. Looks like the references counting approach should help 
>us here. E.g.
>1. grab a reference before we put a command into the queue
>1.1. grab an extra reference if we are going to wait the completion
>2. release the reference as soon as we are done with the command execution
>3. in case of completion waiting release the reference as soon as we are 
>done with waiting due to completion or timeout
>
>Could you try the following patch? Please note, besides the reference 
>counter introduction it also moves completion and result storage inside 
>the command structure as advised by the completion documentation.
>

Yes, please let me try the following patch.
[...]

Thanks.

Jinjian,
Best Regards.