[PATCH v2 11/11] arm64: dts: rockchip: Add nodes related to eDP1 for RK3588
Damon Ding
damon.ding at rock-chips.com
Sun Dec 15 19:12:25 PST 2024
The related nodes are hdptxphy1_grf, hdptxphy1 and edp1. And the
aliases edp0 and edp1 are added to separate two independent eDP
devices.
Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
---
.../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 0ce0934ec6b7..17cc0b619744 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -7,6 +7,11 @@
#include "rk3588-extra-pinctrl.dtsi"
/ {
+ aliases {
+ edp0 = &edp0;
+ edp1 = &edp1;
+ };
+
usb_host1_xhci: usb at fc400000 {
compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
reg = <0x0 0xfc400000 0x0 0x400000>;
@@ -67,6 +72,11 @@ u2phy1_otg: otg-port {
};
};
+ hdptxphy1_grf: syscon at fd5e4000 {
+ compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
+ reg = <0x0 0xfd5e4000 0x0 0x100>;
+ };
+
i2s8_8ch: i2s at fddc8000 {
compatible = "rockchip,rk3588-i2s-tdm";
reg = <0x0 0xfddc8000 0x0 0x1000>;
@@ -135,6 +145,35 @@ i2s10_8ch: i2s at fde00000 {
status = "disabled";
};
+ edp1: edp at fded0000 {
+ compatible = "rockchip,rk3588-edp";
+ reg = <0x0 0xfded0000 0x0 0x1000>;
+ clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>, <&cru CLK_EDP1_200M>;
+ clock-names = "dp", "pclk", "spdif";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&hdptxphy1>;
+ phy-names = "dp";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_EDP1_24M>, <&cru SRST_P_EDP1>;
+ reset-names = "dp", "apb";
+ rockchip,grf = <&vo1_grf>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp1_in: port at 0 {
+ reg = <0>;
+ };
+
+ edp1_out: port at 1 {
+ reg = <1>;
+ };
+ };
+ };
+
pcie3x4: pcie at fe150000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
@@ -395,6 +434,22 @@ sata-port at 0 {
};
};
+ hdptxphy1: phy at fed70000 {
+ compatible = "rockchip,rk3588-hdptx-phy";
+ reg = <0x0 0xfed70000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX1>;
+ clock-names = "ref", "apb";
+ #phy-cells = <0>;
+ resets = <&cru SRST_HDPTX1>, <&cru SRST_P_HDPTX1>,
+ <&cru SRST_HDPTX1_INIT>, <&cru SRST_HDPTX1_CMN>,
+ <&cru SRST_HDPTX1_LANE>, <&cru SRST_HDPTX1_ROPLL>,
+ <&cru SRST_HDPTX1_LCPLL>;
+ reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
+ "lcpll";
+ rockchip,grf = <&hdptxphy1_grf>;
+ status = "disabled";
+ };
+
usbdp_phy1: phy at fed90000 {
compatible = "rockchip,rk3588-usbdp-phy";
reg = <0x0 0xfed90000 0x0 0x10000>;
--
2.34.1
More information about the linux-arm-kernel
mailing list