[PATCH RESEND v4 2/2] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)

[Markuss Broks]

Samsung Galaxy S9 (SM-G960F), codenamed starlte, is a mobile phone
released in 2017. It has 4GB of RAM, 64GB of UFS storage, Exynos9810
SoC and 1440x2960 Super AMOLED display.

This initial device tree enables the framebuffer pre-initialised
by bootloader and physical buttons of the device, with more support
to come in the future.

Co-developed-by: Maksym Holovach <nergzd at nergzd723.xyz>
Signed-off-by: Maksym Holovach <nergzd at nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks at gmail.com>
---
 arch/arm64/boot/dts/exynos/Makefile               |   1 +
 arch/arm64/boot/dts/exynos/exynos9810-starlte.dts | 119 ++++++++++++++++++++++
 2 files changed, 120 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index ee73e1a2db7ea64a0b8e9067a1a264e366f59bc3..f6f4bc650a94db0bc6bc017432e2e3dbba90e8c3 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
 	exynos8895-dreamlte.dtb		\
+	exynos9810-starlte.dtb		\
 	exynos990-c1s.dtb		\
 	exynos990-r8s.dtb               \
 	exynos990-x1s.dtb		\
diff --git a/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
new file mode 100644
index 0000000000000000000000000000000000000000..fc0ddfee4cd63d2fc53cae3d7447f66d39c134e9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-starlte.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S9 (starlte/SM-G960F) device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks at gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd at nergzd723.xyz>
+ */
+
+/dts-v1/;
+#include "exynos9810.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung Galaxy S9 (SM-G960F)";
+	compatible = "samsung,starlte", "samsung,exynos9810";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer at cc000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&key_power &key_voldown &key_volup &key_wink>;
+		pinctrl-names = "default";
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/* In stock firmware used for assistant. Map it as a camera button for now */
+		wink-key {
+			label = "Camera";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&gpa0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3c800000>,
+		      <0x0 0xc0000000 0x20000000>,
+		      <0x0 0xe1900000 0x1e700000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer at cc000000 {
+			reg = <0x0 0xcc000000 (1440 * 2960 * 4)>;
+			no-map;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_wink: key-wink-pins {
+		samsung,pins = "gpa0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};

-- 
2.47.0