[PATCH v8 5/5] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine

[Konrad Dybcio]

On 6.12.2024 8:19 PM, Vikram Sharma wrote:
> The Vision Mezzanine for the RB3 ships with an imx577 camera sensor.
> Enable the IMX577 on the vision mezzanine.
> 
> An example media-ctl pipeline for the imx577 is:
> 
> media-ctl --reset
> media-ctl -v -V '"imx577 '19-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> 
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp at quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa at quicinc.com>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad