[PATCH v3 2/2] arm64: dts: mediatek: mt8183: willow: Support second source touchscreen

[Hsin-Te Yuan]

Some willow devices use second source touchscreen.

Fixes: f006bcf1c972 ("arm64: dts: mt8183: Add kukui-jacuzzi-willow board")
Signed-off-by: Hsin-Te Yuan <yuanhsinte at chromium.org>
---
 .../boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi    | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
index 76d33540166f900c99c419c4f97ca0a56cf658f5..c942e461a177efe1e711a978c3bfb9f852f1b0ee 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -6,6 +6,21 @@
 /dts-v1/;
 #include "mt8183-kukui-jacuzzi.dtsi"
 
+&i2c0 {
+	touchscreen at 40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
 &i2c2 {
 	trackpad at 2c {
 		compatible = "hid-over-i2c";

-- 
2.47.1.613.gc27f4b7a9f-goog