[PATCH v3 6/7] arm64: dts: broadcom: Correct hdmi device node names

[Dave Stevenson]

The names of the hdmi0 and hdmi1 nodes had addresses that
didn't match the reg properties for the nodes.

Fixes: f66b382affd8 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index bd78af0211b6..f42fad2d8b37 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -352,7 +352,7 @@ main_irq: interrupt-controller at 7d508400 {
 			#interrupt-cells = <1>;
 		};
 
-		hdmi0: hdmi at 7ef00700 {
+		hdmi0: hdmi at 7c701400 {
 			compatible = "brcm,bcm2712-hdmi0";
 			reg = <0x7c701400 0x300>,
 			      <0x7c701000 0x200>,
@@ -381,7 +381,7 @@ hdmi0: hdmi at 7ef00700 {
 			ddc = <&ddc0>;
 		};
 
-		hdmi1: hdmi at 7ef05700 {
+		hdmi1: hdmi at 7c706400 {
 			compatible = "brcm,bcm2712-hdmi1";
 			reg = <0x7c706400 0x300>,
 			      <0x7c706000 0x200>,

-- 
2.34.1