[PATCH v2 5/7] arm64: dts: broadcom: Rename bcm2712 interrupt controllers

[Dave Stevenson]

CHECK_DTBS produces errors on bcm2712-rpi-5-b.dtb and bcm2712-d-rpi-5-b.dtb
of:
intc at 7d508380: $nodename:0: 'intc at 7d508380' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
        from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
intc at 7d508400: $nodename:0: 'intc at 7d508400' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
        from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#

Rename the nodes from intc to interrupt-controller.

Fixes: f66b382affd8 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 39305e0869ec..bd78af0211b6 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -336,7 +336,7 @@ ddc1: i2c at 7d508280 {
 			#size-cells = <0>;
 		};
 
-		bsc_irq: intc at 7d508380 {
+		bsc_irq: interrupt-controller at 7d508380 {
 			compatible = "brcm,bcm7271-l2-intc";
 			reg = <0x7d508380 0x10>;
 			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
@@ -344,7 +344,7 @@ bsc_irq: intc at 7d508380 {
 			#interrupt-cells = <1>;
 		};
 
-		main_irq: intc at 7d508400 {
+		main_irq: interrupt-controller at 7d508400 {
 			compatible = "brcm,bcm7271-l2-intc";
 			reg = <0x7d508400 0x10>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;

-- 
2.34.1