[PATCH v2 1/7] dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
Dave Stevenson
dave.stevenson at raspberrypi.com
Thu Dec 12 08:18:51 PST 2024
Commit 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
added the compatible strings for BCM2712, but missed out that the
number of interrupts changed.
Update the schema to include the interrupt requirements.
Fixes: 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
---
.../bindings/display/brcm,bcm2711-hdmi.yaml | 107 ++++++++++++++++++---
1 file changed, 93 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index 6d11f5955b51..a7ca3a336187 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -56,22 +56,38 @@ properties:
- const: cec
interrupts:
- items:
- - description: CEC TX interrupt
- - description: CEC RX interrupt
- - description: CEC stuck at low interrupt
- - description: Wake-up interrupt
- - description: Hotplug connected interrupt
- - description: Hotplug removed interrupt
+ oneOf:
+ - items:
+ - description: CEC TX interrupt
+ - description: CEC RX interrupt
+ - description: CEC stuck at low interrupt
+ - description: Wake-up interrupt
+ - description: Hotplug connected interrupt
+ - description: Hotplug removed interrupt
+
+ - items:
+ - description: CEC TX interrupt
+ - description: CEC RX interrupt
+ - description: CEC stuck at low interrupt
+ - description: Hotplug connected interrupt
+ - description: Hotplug removed interrupt
interrupt-names:
- items:
- - const: cec-tx
- - const: cec-rx
- - const: cec-low
- - const: wakeup
- - const: hpd-connected
- - const: hpd-removed
+ oneOf:
+ - items:
+ - const: cec-tx
+ - const: cec-rx
+ - const: cec-low
+ - const: wakeup
+ - const: hpd-connected
+ - const: hpd-removed
+
+ - items:
+ - const: cec-tx
+ - const: cec-rx
+ - const: cec-low
+ - const: hpd-connected
+ - const: hpd-removed
ddc:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -112,6 +128,66 @@ required:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm2711-hdmi0
+ - brcm,bcm2711-hdmi1
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: CEC TX interrupt
+ - description: CEC RX interrupt
+ - description: CEC stuck at low interrupt
+ - description: Wake-up interrupt
+ - description: Hotplug connected interrupt
+ - description: Hotplug removed interrupt
+ interrupt-names:
+ items:
+ - const: cec-tx
+ - const: cec-rx
+ - const: cec-low
+ - const: wakeup
+ - const: hpd-connected
+ - const: hpd-removed
+
+
+ required:
+ - interrupts
+ - interrupt-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm2712-hdmi0
+ - brcm,bcm2712-hdmi1
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: CEC TX interrupt
+ - description: CEC RX interrupt
+ - description: CEC stuck at low interrupt
+ - description: Hotplug connected interrupt
+ - description: Hotplug removed interrupt
+ interrupts-names:
+ items:
+ - const: cec-tx
+ - const: cec-rx
+ - const: cec-low
+ - const: hpd-connected
+ - const: hpd-removed
+
+ required:
+ - interrupts
+ - interrupt-names
+
examples:
- |
hdmi0: hdmi at 7ef00700 {
@@ -136,6 +212,9 @@ examples:
"hd";
clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
clock-names = "hdmi", "bvb", "audio", "cec";
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+ interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup",
+ "hpd-connected", "hpd-removed";
resets = <&dvp 0>;
ddc = <&ddc0>;
};
--
2.34.1
More information about the linux-arm-kernel
mailing list