[PATCH v4 14/15] arm64: dts: st: add csi & dcmipp node in stm32mp25

[Alain Volmat]

Add nodes describing the csi and dcmipp controllers handling the
camera pipeline on the stm32mp25x.

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 6fe12e3bd7dd..0176ccafa03f 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -603,6 +603,29 @@ i2c8: i2c at 46040000 {
 				status = "disabled";
 			};
 
+			csi: csi at 48020000 {
+				compatible = "st,stm32mp25-csi";
+				reg = <0x48020000 0x2000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc CSI_R>;
+				clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>,
+					 <&rcc CK_KER_CSIPHY>;
+				clock-names = "pclk", "txesc", "csi2phy";
+				access-controllers = <&rifsc 86>;
+				status = "disabled";
+			};
+
+			dcmipp: dcmipp at 48030000 {
+				compatible = "st,stm32mp25-dcmipp";
+				reg = <0x48030000 0x1000>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&rcc DCMIPP_R>;
+				clocks = <&rcc CK_BUS_DCMIPP>, <&rcc CK_KER_CSI>;
+				clock-names = "kclk", "mclk";
+				access-controllers = <&rifsc 87>;
+				status = "disabled";
+			};
+
 			sdmmc1: mmc at 48220000 {
 				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00353180>;

-- 
2.34.1