[PATCH] ARM: dts: nxp: imx6qdl: add dr_mode to usbotg

[Hui Wang]

For the chipidea usb driver, if the dr_mode is not set, it will set
the device to otg mode by default, so here the dr_mode has not been
set for a long time. But some testcases need to parse the dr_mode from
DT and decide the follow-up test strategy, here set the dr_mode to otg
explicitly for QA's testcases.

Signed-off-by: Hui Wang <hui.wang at canonical.com>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index d2200c9db25a..285fb7314a88 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -982,6 +982,7 @@ usbotg: usb at 2184000 {
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				dr_mode = "otg";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
-- 
2.34.1