[PATCH 14/15] ARM: zynq: Add sdhci to alias node

[Michal Simek]

Ensure that controller will all the time use the same ID.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/boot/dts/xilinx/zynq-microzed.dts | 1 +
 arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts  | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/xilinx/zynq-microzed.dts b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
index 4c3e56980c98..20c04862679d 100644
--- a/arch/arm/boot/dts/xilinx/zynq-microzed.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-microzed.dts
@@ -14,6 +14,7 @@ aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
 		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory at 0 {
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
index 5e4247da2285..56b917eec783 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
@@ -11,6 +11,7 @@ aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
 		spi0 = &qspi;
+		mmc0 = &sdhci0;
 	};
 
 	memory at 0 {
-- 
2.43.0