[PATCH v7 0/3] coresight: Add static trace id support

[Suzuki K Poulose]

On Thu, 21 Nov 2024 14:28:26 +0800, Mao Jinlong wrote:
> Some HW has static trace id which cannot be changed via
> software programming. For this case, configure the trace id
> in device tree with "arm,static-trace-id = <xxx>", and
> call coresight_trace_id_get_static_system_id with the trace id value
> in device probe function. The id will be reserved for the HW
> all the time if the device is probed.
> 
> [...]

Applied, with minor fixups. thanks!

[1/3] dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
      https://git.kernel.org/coresight/c/d0a10da78cbfabcbc2eda87ac238bc03bb2b2c81
[2/3] coresight: Add support to get static id for system trace sources
      https://git.kernel.org/coresight/c/fd9b7e8e9fbc23d69fa4accc881dea2cf13a2e2e
[3/3] coresight: dummy: Add static trace id support for dummy source
      https://git.kernel.org/coresight/c/f7d7454607cf863cc860e201636117e242d45fe0

Best regards,
-- 
Suzuki K Poulose <suzuki.poulose at arm.com>