[net-next PATCH v10 5/9] mfd: an8855: Add support for Airoha AN8855 Switch MFD

[Christophe JAILLET]

Le 08/12/2024 à 01:20, Christian Marangi a écrit :
> Add support for Airoha AN8855 Switch MFD that provide support for a DSA
> switch and a NVMEM provider. Also provide support for a virtual MDIO
> passthrough as the PHYs address for the switch are shared with the switch
> address
> 
> Signed-off-by: Christian Marangi <ansuelsmth-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org>
> ---
>   MAINTAINERS                           |   1 +
>   drivers/mfd/Kconfig                   |   9 +
>   drivers/mfd/Makefile                  |   1 +
>   drivers/mfd/airoha-an8855.c           | 279 ++++++++++++++++++++++++++
>   include/linux/mfd/airoha-an8855-mfd.h |  41 ++++
>   5 files changed, 331 insertions(+)
>   create mode 100644 drivers/mfd/airoha-an8855.c
>   create mode 100644 include/linux/mfd/airoha-an8855-mfd.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f3e3f6938824..7f4d7c48b6e1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -721,6 +721,7 @@ F:	Documentation/devicetree/bindings/mfd/airoha,an8855-mfd.yaml
>   F:	Documentation/devicetree/bindings/net/airoha,an8855-mdio.yaml
>   F:	Documentation/devicetree/bindings/net/dsa/airoha,an8855-switch.yaml
>   F:	Documentation/devicetree/bindings/nvmem/airoha,an8855-efuse.yaml
> +F:	drivers/mfd/airoha-an8855.c
>   
>   AIROHA ETHERNET DRIVER
>   M:	Lorenzo Bianconi <lorenzo-DgEjT+Ai2ygdnm+yROfE0A at public.gmane.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ae23b317a64e..a83db24336d9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -53,6 +53,15 @@ config MFD_ALTERA_SYSMGR
>   	  using regmap_mmio accesses for ARM32 parts and SMC calls to
>   	  EL3 for ARM64 parts.
>   
> +config MFD_AIROHA_AN8855
> +	bool "Airoha AN8855 Switch MFD"
> +	depends on MDIO && OF
> +	select MFD_CORE
> +	help
> +	  Support for the Airoha AN8855 Switch MFD. This is a SoC Switch
> +	  that provide various peripherals. Currently it provides a

provides?

> +	  DSA switch and a NVMEM provider.
> +
>   config MFD_ACT8945A
>   	tristate "Active-semi ACT8945A"
>   	select MFD_CORE

...

> +static int an8855_mfd_probe(struct mdio_device *mdiodev)
> +{
> +	struct an8855_mfd_priv *priv;
> +	struct regmap *regmap;
> +
> +	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->bus = mdiodev->bus;
> +	priv->dev = &mdiodev->dev;
> +	priv->switch_addr = mdiodev->addr;
> +	/* no DMA for mdiobus, mute warning for DMA mask not set */
> +	priv->dev->dma_mask = &priv->dev->coherent_dma_mask;
> +
> +	regmap = devm_regmap_init(priv->dev, NULL, priv,
> +				  &an8855_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(priv->dev, "regmap initialization failed");

Nitpick: Missing ending \n.
Also, return dev_err_probe() could be used.

> +		return PTR_ERR(priv->dev);
> +	}
> +
> +	dev_set_drvdata(&mdiodev->dev, priv);

Is it needed?
There is no dev_get_drvdata() in this patch

> +
> +	return devm_mfd_add_devices(priv->dev, PLATFORM_DEVID_AUTO, an8855_mfd_devs,
> +				    ARRAY_SIZE(an8855_mfd_devs), NULL, 0,
> +				    NULL);
> +}

...

CJ