[PATCH 3/4] phy: rockchip: samsung-hdptx: Setup TMDS char rate via phy_configure_opts_hdmi

[Cristian Ciocaltea]

The current workaround to setup the TMDS character rate relies on the
unconventional usage of phy_set_bus_width().

Make use of the recently introduced HDMI PHY configuration API for this
purpose.  The workaround will be dropped as soon as the switch has been
completed on both ends.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 42 ++++++++++++++++++-----
 1 file changed, 33 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index ceab9c71d3b53ae0b746a10c081fcfaa7d5c5ae7..eeadebdc476caa87aebbbd82f7102b62b22a0ea6 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -273,6 +273,7 @@ struct rk_hdptx_phy {
 	struct clk_bulk_data *clks;
 	int nr_clks;
 	struct reset_control_bulk_data rsts[RST_MAX];
+	unsigned long tmds_char_rate;
 
 	/* clk provider */
 	struct clk_hw hw;
@@ -902,18 +903,20 @@ static int rk_hdptx_phy_consumer_put(struct rk_hdptx_phy *hdptx, bool force)
 static int rk_hdptx_phy_power_on(struct phy *phy)
 {
 	struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
-	int bus_width = phy_get_bus_width(hdptx->phy);
+	unsigned int rate = hdptx->tmds_char_rate / 100;
 	int ret;
 
-	/*
-	 * FIXME: Temporary workaround to pass pixel_clk_rate
-	 * from the HDMI bridge driver until phy_configure_opts_hdmi
-	 * becomes available in the PHY API.
-	 */
-	unsigned int rate = bus_width & 0xfffffff;
+	if (rate == 0) {
+		/*
+		 * FIXME: Temporary workaround to setup TMDS char rate
+		 * from the RK HDMI bridge driver.
+		 * Will be removed as soon the switch to the HDMI PHY
+		 * configuration API has been completed on both ends.
+		 */
+		rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
+	}
 
-	dev_dbg(hdptx->dev, "%s bus_width=%x rate=%u\n",
-		__func__, bus_width, rate);
+	dev_dbg(hdptx->dev, "%s rate=%u\n", __func__, rate);
 
 	ret = rk_hdptx_phy_consumer_get(hdptx, rate);
 	if (ret)
@@ -933,9 +936,20 @@ static int rk_hdptx_phy_power_off(struct phy *phy)
 	return rk_hdptx_phy_consumer_put(hdptx, false);
 }
 
+static int rk_hdptx_phy_configure(struct phy *phy,
+				  union phy_configure_opts *opts)
+{
+	struct rk_hdptx_phy *hdptx = phy_get_drvdata(phy);
+
+	hdptx->tmds_char_rate = opts->hdmi.tmds_char_rate;
+
+	return 0;
+}
+
 static const struct phy_ops rk_hdptx_phy_ops = {
 	.power_on  = rk_hdptx_phy_power_on,
 	.power_off = rk_hdptx_phy_power_off,
+	.configure = rk_hdptx_phy_configure,
 	.owner	   = THIS_MODULE,
 };
 
@@ -991,6 +1005,16 @@ static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
+	/*
+	 * The TMDS char rate set via phy_configure(), if any, has
+	 * precedence over the rate provided via clk_set_rate().
+	 */
+	if (hdptx->tmds_char_rate && hdptx->tmds_char_rate != rate) {
+		dev_dbg(hdptx->dev, "Replaced clk_set_rate=%lu with tmds_char_rate=%lu\n",
+			rate, hdptx->tmds_char_rate);
+		rate = hdptx->tmds_char_rate;
+	}
+
 	return rk_hdptx_ropll_tmds_cmn_config(hdptx, rate / 100);
 }
 

-- 
2.47.0