[PATCH v8 3/4] arm64: Provide an AMU-based version of arch_freq_get_on_cpu
Beata Michalska
beata.michalska at arm.com
Fri Dec 6 05:55:59 PST 2024
With the Frequency Invariance Engine (FIE) being already wired up with
sched tick and making use of relevant (core counter and constant
counter) AMU counters, getting the average frequency for a given CPU,
can be achieved by utilizing the frequency scale factor which reflects
an average CPU frequency for the last tick period length.
The solution is partially based on APERF/MPERF implementation of
arch_freq_get_on_cpu.
Suggested-by: Ionela Voinescu <ionela.voinescu at arm.com>
Signed-off-by: Beata Michalska <beata.michalska at arm.com>
---
arch/arm64/kernel/topology.c | 109 +++++++++++++++++++++++++++++++----
1 file changed, 99 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index cb180684d10d..5f5738b174c7 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -17,6 +17,7 @@
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/sched/isolation.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
@@ -88,18 +89,28 @@ int __init parse_acpi_topology(void)
* initialized.
*/
static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) = 1UL << (2 * SCHED_CAPACITY_SHIFT);
-static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
-static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
static cpumask_var_t amu_fie_cpus;
+struct amu_cntr_sample {
+ u64 arch_const_cycles_prev;
+ u64 arch_core_cycles_prev;
+ unsigned long last_scale_update;
+};
+
+static DEFINE_PER_CPU_SHARED_ALIGNED(struct amu_cntr_sample, cpu_amu_samples);
+
void update_freq_counters_refs(void)
{
- this_cpu_write(arch_core_cycles_prev, read_corecnt());
- this_cpu_write(arch_const_cycles_prev, read_constcnt());
+ struct amu_cntr_sample *amu_sample = this_cpu_ptr(&cpu_amu_samples);
+
+ amu_sample->arch_core_cycles_prev = read_corecnt();
+ amu_sample->arch_const_cycles_prev = read_constcnt();
}
static inline bool freq_counters_valid(int cpu)
{
+ struct amu_cntr_sample *amu_sample = per_cpu_ptr(&cpu_amu_samples, cpu);
+
if ((cpu >= nr_cpu_ids) || !cpumask_test_cpu(cpu, cpu_present_mask))
return false;
@@ -108,8 +119,8 @@ static inline bool freq_counters_valid(int cpu)
return false;
}
- if (unlikely(!per_cpu(arch_const_cycles_prev, cpu) ||
- !per_cpu(arch_core_cycles_prev, cpu))) {
+ if (unlikely(!amu_sample->arch_const_cycles_prev ||
+ !amu_sample->arch_core_cycles_prev)) {
pr_debug("CPU%d: cycle counters are not enabled.\n", cpu);
return false;
}
@@ -152,17 +163,22 @@ void freq_inv_set_max_ratio(int cpu, u64 max_rate)
static void amu_scale_freq_tick(void)
{
+ struct amu_cntr_sample *amu_sample = this_cpu_ptr(&cpu_amu_samples);
u64 prev_core_cnt, prev_const_cnt;
u64 core_cnt, const_cnt, scale;
- prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
- prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
+ prev_const_cnt = amu_sample->arch_const_cycles_prev;
+ prev_core_cnt = amu_sample->arch_core_cycles_prev;
update_freq_counters_refs();
- const_cnt = this_cpu_read(arch_const_cycles_prev);
- core_cnt = this_cpu_read(arch_core_cycles_prev);
+ const_cnt = amu_sample->arch_const_cycles_prev;
+ core_cnt = amu_sample->arch_core_cycles_prev;
+ /*
+ * This should not happen unless the AMUs have been reset and the
+ * counter values have not been restored - unlikely
+ */
if (unlikely(core_cnt <= prev_core_cnt ||
const_cnt <= prev_const_cnt))
return;
@@ -182,6 +198,8 @@ static void amu_scale_freq_tick(void)
scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
this_cpu_write(arch_freq_scale, (unsigned long)scale);
+
+ amu_sample->last_scale_update = jiffies;
}
static struct scale_freq_data amu_sfd = {
@@ -189,6 +207,77 @@ static struct scale_freq_data amu_sfd = {
.set_freq_scale = amu_scale_freq_tick,
};
+static __always_inline bool amu_fie_cpu_supported(unsigned int cpu)
+{
+ return cpumask_available(amu_fie_cpus) &&
+ cpumask_test_cpu(cpu, amu_fie_cpus);
+}
+
+#define AMU_SAMPLE_EXP_MS 20
+
+int arch_freq_get_on_cpu(int cpu)
+{
+ struct amu_cntr_sample *amu_sample;
+ unsigned int start_cpu = cpu;
+ unsigned long last_update;
+ unsigned int freq = 0;
+ u64 scale;
+
+ if (!amu_fie_cpu_supported(cpu) || !arch_scale_freq_ref(cpu))
+ return -EOPNOTSUPP;
+
+retry:
+ amu_sample = per_cpu_ptr(&cpu_amu_samples, cpu);
+
+ last_update = amu_sample->last_scale_update;
+
+ /*
+ * For those CPUs that are in full dynticks mode, or those that have
+ * not seen tick for a while, try an alternative source for the counters
+ * (and thus freq scale), if available, for given policy: this boils
+ * down to identifying an active cpu within the same freq domain, if any.
+ */
+ if (!housekeeping_cpu(cpu, HK_TYPE_TICK) ||
+ time_is_before_jiffies(last_update + msecs_to_jiffies(AMU_SAMPLE_EXP_MS))) {
+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+ int ref_cpu = cpu;
+
+ if (!policy)
+ return -EINVAL;
+
+ if (!cpumask_intersects(policy->related_cpus,
+ housekeeping_cpumask(HK_TYPE_TICK))) {
+ cpufreq_cpu_put(policy);
+ return -EOPNOTSUPP;
+ }
+
+
+ do {
+ ref_cpu = cpumask_next_wrap(ref_cpu, policy->cpus,
+ start_cpu, false);
+
+ } while (ref_cpu < nr_cpu_ids && idle_cpu(ref_cpu));
+
+ cpufreq_cpu_put(policy);
+
+ if (ref_cpu >= nr_cpu_ids)
+ /* No alternative to pull info from */
+ return -EAGAIN;
+
+ cpu = ref_cpu;
+ goto retry;
+ }
+ /*
+ * Reversed computation to the one used to determine
+ * the arch_freq_scale value
+ * (see amu_scale_freq_tick for details)
+ */
+ scale = arch_scale_freq_capacity(cpu);
+ freq = scale * arch_scale_freq_ref(cpu);
+ freq >>= SCHED_CAPACITY_SHIFT;
+ return freq;
+}
+
static void amu_fie_setup(const struct cpumask *cpus)
{
int cpu;
--
2.25.1
More information about the linux-arm-kernel
mailing list