[PATCH] arm64: dts: apple: Split s8000/s8003 SoC DTS files
Nick Chan
towinchenmi at gmail.com
Fri Dec 6 05:49:18 PST 2024
Despite what the code comments said, the DTS files were not split properly.
Since these two SoCs are now known to have minor differences like in
latencies for cpufreq state transistions, split the DTS files now.
Signed-off-by: Nick Chan <towinchenmi at gmail.com>
---
Hi,
I am preparing multiple series for cpufreq and backlight, both of which
modifies the Apple A9 DTS files. I am sending this first to make it
easier to handle conflicts.
This patch depends on PMGR nodes for Apple A7-A11 SoCs[1] since it
also renames the pmgr bindings files.
[1]: https://lore.kernel.org/asahi/20241203050640.109378-1-towinchenmi@gmail.com/T
Nick Chan
.../{s8000-pmgr.dtsi => s800-0-3-pmgr.dtsi} | 0
arch/arm64/boot/dts/apple/s800-0-3.dtsi | 162 ++++++++++++++++++
arch/arm64/boot/dts/apple/s8000.dtsi | 155 +----------------
arch/arm64/boot/dts/apple/s8003.dtsi | 10 +-
4 files changed, 168 insertions(+), 159 deletions(-)
rename arch/arm64/boot/dts/apple/{s8000-pmgr.dtsi => s800-0-3-pmgr.dtsi} (100%)
create mode 100644 arch/arm64/boot/dts/apple/s800-0-3.dtsi
diff --git a/arch/arm64/boot/dts/apple/s8000-pmgr.dtsi b/arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/apple/s8000-pmgr.dtsi
rename to arch/arm64/boot/dts/apple/s800-0-3-pmgr.dtsi
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
new file mode 100644
index 000000000000..1e0b8f631ac0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple S8000/S8003 "A9" SoC
+ *
+ * This file contains parts common to both variants of A9
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio at kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+ interrupt-parent = <&aic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clkref: clock-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "clkref";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "apple,twister";
+ reg = <0x0 0x0>;
+ cpu-release-addr = <0 0>; /* To be filled in by loader */
+ enable-method = "spin-table";
+ device_type = "cpu";
+ };
+
+ cpu1: cpu at 1 {
+ compatible = "apple,twister";
+ reg = <0x0 0x1>;
+ cpu-release-addr = <0 0>; /* To be filled in by loader */
+ enable-method = "spin-table";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ nonposted-mmio;
+ ranges;
+
+ serial0: serial at 20a0c0000 {
+ compatible = "apple,s5l-uart";
+ reg = <0x2 0x0a0c0000 0x0 0x4000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
+ /* Use the bootloader-enabled clocks for now. */
+ clocks = <&clkref>, <&clkref>;
+ clock-names = "uart", "clk_uart_baud0";
+ power-domains = <&ps_uart0>;
+ status = "disabled";
+ };
+
+ pmgr: power-management at 20e000000 {
+ compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reg = <0x2 0xe000000 0 0x8c000>;
+ };
+
+ aic: interrupt-controller at 20e100000 {
+ compatible = "apple,s8000-aic", "apple,aic";
+ reg = <0x2 0x0e100000 0x0 0x100000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ power-domains = <&ps_aic>;
+ };
+
+ pinctrl_ap: pinctrl at 20f100000 {
+ compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+ reg = <0x2 0x0f100000 0x0 0x100000>;
+ power-domains = <&ps_gpio>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_ap 0 0 208>;
+ apple,npins = <208>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_aop: pinctrl at 2100f0000 {
+ compatible = "apple,s8000-pinctrl", "apple,pinctrl";
+ reg = <0x2 0x100f0000 0x0 0x100000>;
+ power-domains = <&ps_aop_gpio>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aop 0 0 42>;
+ apple,npins = <42>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmgr_mini: power-management at 210200000 {
+ compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reg = <0x2 0x10200000 0 0x84000>;
+ };
+
+ wdt: watchdog at 2102b0000 {
+ compatible = "apple,s8000-wdt", "apple,wdt";
+ reg = <0x2 0x102b0000 0x0 0x4000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&aic>;
+ interrupt-names = "phys", "virt";
+ /* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
+ interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+#include "s800-0-3-pmgr.dtsi"
+
+/*
+ * The A9 was made by two separate fabs on two different process
+ * nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
+ */
diff --git a/arch/arm64/boot/dts/apple/s8000.dtsi b/arch/arm64/boot/dts/apple/s8000.dtsi
index 84d6b4939ac4..c7e39abda7e1 100644
--- a/arch/arm64/boot/dts/apple/s8000.dtsi
+++ b/arch/arm64/boot/dts/apple/s8000.dtsi
@@ -7,160 +7,11 @@
* Copyright (c) 2022, Konrad Dybcio <konradybcio at kernel.org>
*/
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/apple-aic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/apple.h>
-
-/ {
- interrupt-parent = <&aic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- clkref: clock-ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "clkref";
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu at 0 {
- compatible = "apple,twister";
- reg = <0x0 0x0>;
- cpu-release-addr = <0 0>; /* To be filled in by loader */
- enable-method = "spin-table";
- device_type = "cpu";
- };
-
- cpu1: cpu at 1 {
- compatible = "apple,twister";
- reg = <0x0 0x1>;
- cpu-release-addr = <0 0>; /* To be filled in by loader */
- enable-method = "spin-table";
- device_type = "cpu";
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- nonposted-mmio;
- ranges;
-
- serial0: serial at 20a0c0000 {
- compatible = "apple,s5l-uart";
- reg = <0x2 0x0a0c0000 0x0 0x4000>;
- reg-io-width = <4>;
- interrupt-parent = <&aic>;
- interrupts = <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>;
- /* Use the bootloader-enabled clocks for now. */
- clocks = <&clkref>, <&clkref>;
- clock-names = "uart", "clk_uart_baud0";
- power-domains = <&ps_uart0>;
- status = "disabled";
- };
-
- pmgr: power-management at 20e000000 {
- compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
-
- reg = <0x2 0xe000000 0 0x8c000>;
- };
-
- aic: interrupt-controller at 20e100000 {
- compatible = "apple,s8000-aic", "apple,aic";
- reg = <0x2 0x0e100000 0x0 0x100000>;
- #interrupt-cells = <3>;
- interrupt-controller;
- power-domains = <&ps_aic>;
- };
-
- pinctrl_ap: pinctrl at 20f100000 {
- compatible = "apple,s8000-pinctrl", "apple,pinctrl";
- reg = <0x2 0x0f100000 0x0 0x100000>;
- power-domains = <&ps_gpio>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_ap 0 0 208>;
- apple,npins = <208>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&aic>;
- interrupts = <AIC_IRQ 42 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 43 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 44 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 45 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pinctrl_aop: pinctrl at 2100f0000 {
- compatible = "apple,s8000-pinctrl", "apple,pinctrl";
- reg = <0x2 0x100f0000 0x0 0x100000>;
- power-domains = <&ps_aop_gpio>;
-
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aop 0 0 42>;
- apple,npins = <42>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&aic>;
- interrupts = <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 115 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 116 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 117 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 118 IRQ_TYPE_LEVEL_HIGH>,
- <AIC_IRQ 119 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- pmgr_mini: power-management at 210200000 {
- compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
-
- reg = <0x2 0x10200000 0 0x84000>;
- };
-
- wdt: watchdog at 2102b0000 {
- compatible = "apple,s8000-wdt", "apple,wdt";
- reg = <0x2 0x102b0000 0x0 0x4000>;
- clocks = <&clkref>;
- interrupt-parent = <&aic>;
- interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupt-parent = <&aic>;
- interrupt-names = "phys", "virt";
- /* Note that A9 doesn't actually have a hypervisor (EL2 is not implemented). */
- interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
- <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
- };
-};
-
-#include "s8000-pmgr.dtsi"
+#include "s800-0-3.dtsi"
/*
* The A9 was made by two separate fabs on two different process
* nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
- * the S8003 (APL1022) on 16nm. While they are seemingly the same,
- * they do have distinct part numbers and devices using them have
- * distinct model names. There are currently no known differences
- * between these as far as Linux is concerned, but let's keep things
- * structured properly to make it easier to alter the behaviour of
- * one of the chips if need be.
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
*/
diff --git a/arch/arm64/boot/dts/apple/s8003.dtsi b/arch/arm64/boot/dts/apple/s8003.dtsi
index 7e4ad4f7e499..807e3452f8a7 100644
--- a/arch/arm64/boot/dts/apple/s8003.dtsi
+++ b/arch/arm64/boot/dts/apple/s8003.dtsi
@@ -7,15 +7,11 @@
* Copyright (c) 2022, Konrad Dybcio <konradybcio at kernel.org>
*/
-#include "s8000.dtsi"
+#include "s800-0-3.dtsi"
/*
* The A9 was made by two separate fabs on two different process
* nodes: Samsung made the S8000 (APL0898) on 14nm and TSMC made
- * the S8003 (APL1022) on 16nm. While they are seemingly the same,
- * they do have distinct part numbers and devices using them have
- * distinct model names. There are currently no known differences
- * between these as far as Linux is concerned, but let's keep things
- * structured properly to make it easier to alter the behaviour of
- * one of the chips if need be.
+ * the S8003 (APL1022) on 16nm. There are some minor differences
+ * such as timing in cpufreq state transistions.
*/
base-commit: d47006c7111b57dd2377d072681935aebb9dde25
--
2.47.1
More information about the linux-arm-kernel
mailing list