[PATCH v7 4/5] arm64: dts: qcom: sc7280: Add support for camss
Luca Weiss
luca.weiss at fairphone.com
Thu Dec 5 23:51:38 PST 2024
On Wed Dec 4, 2024 at 11:00 AM CET, Vikram Sharma wrote:
> Add changes to support the camera subsystem on the SC7280.
>
> Signed-off-by: Suresh Vankadara <quic_svankada at quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa at quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
Hi Vikram,
This is working on QCM6490 Fairphone 5 smartphone with WIP drivers for
IMX858 and S5KJN1, thanks!
Tested-by: Luca Weiss <luca.weiss at fairphone.com> # qcm6490-fairphone-fp5
Regards
Luca
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 172 +++++++++++++++++++++++++++
> 1 file changed, 172 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 55db1c83ef55..e363996602d6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -4426,6 +4426,178 @@ cci1_i2c1: i2c-bus at 1 {
> };
> };
>
> + camss: camss at acb3000 {
> + compatible = "qcom,sc7280-camss";
> +
> + reg = <0x0 0x0acb3000 0x0 0x1000>,
> + <0x0 0x0acba000 0x0 0x1000>,
> + <0x0 0x0acc1000 0x0 0x1000>,
> + <0x0 0x0acc8000 0x0 0x1000>,
> + <0x0 0x0accf000 0x0 0x1000>,
> + <0x0 0x0ace0000 0x0 0x2000>,
> + <0x0 0x0ace2000 0x0 0x2000>,
> + <0x0 0x0ace4000 0x0 0x2000>,
> + <0x0 0x0ace6000 0x0 0x2000>,
> + <0x0 0x0ace8000 0x0 0x2000>,
> + <0x0 0x0acaf000 0x0 0x4000>,
> + <0x0 0x0acb6000 0x0 0x4000>,
> + <0x0 0x0acbd000 0x0 0x4000>,
> + <0x0 0x0acc4000 0x0 0x4000>,
> + <0x0 0x0accb000 0x0 0x4000>;
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY3_CLK>,
> + <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&gcc GCC_CAMERA_AHB_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&camcc CAM_CC_ICP_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&camcc CAM_CC_IFE_2_CLK>,
> + <&camcc CAM_CC_IFE_2_AXI_CLK>,
> + <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_2_CSID_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
> + clock-names = "camnoc_axi",
> + "cpas_ahb",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "gcc_camera_ahb",
> + "gcc_cam_hf_axi",
> + "icp_ahb",
> + "vfe0",
> + "vfe0_axi",
> + "vfe0_cphy_rx",
> + "vfe0_csid",
> + "vfe1",
> + "vfe1_axi",
> + "vfe1_cphy_rx",
> + "vfe1_csid",
> + "vfe2",
> + "vfe2_axi",
> + "vfe2_cphy_rx",
> + "vfe2_csid",
> + "vfe_lite0",
> + "vfe_lite0_cphy_rx",
> + "vfe_lite0_csid",
> + "vfe_lite1",
> + "vfe_lite1_cphy_rx",
> + "vfe_lite1_csid";
> +
> + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
> + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "ahb", "hf_0";
> +
> + iommus = <&apps_smmu 0x800 0x4e0>;
> +
> + power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
> + <&camcc CAM_CC_IFE_1_GDSC>,
> + <&camcc CAM_CC_IFE_2_GDSC>,
> + <&camcc CAM_CC_TITAN_TOP_GDSC>;
> + power-domain-names = "ife0", "ife1", "ife2", "top";
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + };
> +
> + port at 1 {
> + reg = <1>;
> + };
> +
> + port at 2 {
> + reg = <2>;
> + };
> +
> + port at 3 {
> + reg = <3>;
> + };
> +
> + port at 4 {
> + reg = <4>;
> + };
> + };
> + };
> +
> camcc: clock-controller at ad00000 {
> compatible = "qcom,sc7280-camcc";
> reg = <0 0x0ad00000 0 0x10000>;
More information about the linux-arm-kernel
mailing list