[PATCH v2 1/4] media: i2c: imx290: Limit analogue gain according to module
Dave Stevenson
dave.stevenson at raspberrypi.com
Thu Dec 5 07:37:01 PST 2024
Hi Alexander
On Thu, 5 Dec 2024 at 15:22, Alexander Stein
<alexander.stein at ew.tq-group.com> wrote:
>
> Hi Dave,
>
> Am Mittwoch, 20. November 2024, 20:17:03 CET schrieb Dave Stevenson:
> > The imx327 only supports up to 29.4dB of analogue gain, vs
> > the imx290 going up to 30dB. Both are in 0.3dB steps.
>
> While I agree for 30dB on imx290, my (maybe outdated) Rev0.2 datasheet says
> up to 27dB in 0.3dB steps.
For IMX327, I have revision E17Z06B93 2019/03/25.
The revision control section for Rev0.3 lists
Page 1: "Correction: Max analog gain 27dB - 29.4dB"
Page 74: "Correction: Max Gain 69dB -> 71.4dB"
The graph in "Gain Adjustment Function" (page 74) also shows values
above 27dB as being purely analogue gain. Certainly 0x62 is red for
analogue, which would be a gain of 29.4dB. The next dot is 0x64 (30dB)
and blue, so we have to trust the text for 0x63 being 29.4dB analogue
and 0.3dB digital gain.
So I'm happy that the limit is 29.4dB.
Dave
> Despite that this change looks good.
>
> Best regards,
> Alexander
>
> > As we now have model specific config, fix this mismatch,
> > and delete the comment referencing it.
> >
> > Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > ---
> > drivers/media/i2c/imx290.c | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index ee698c99001d..da654deb444a 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -176,6 +176,7 @@ struct imx290_model_info {
> > enum imx290_colour_variant colour_variant;
> > const struct cci_reg_sequence *init_regs;
> > size_t init_regs_num;
> > + unsigned int max_analog_gain;
> > const char *name;
> > };
> >
> > @@ -876,14 +877,10 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> > * up to 72.0dB (240) add further digital gain. Limit the range to
> > * analog gain only, support for digital gain can be added separately
> > * if needed.
> > - *
> > - * The IMX327 and IMX462 are largely compatible with the IMX290, but
> > - * have an analog gain range of 0.0dB to 29.4dB and 42dB of digital
> > - * gain. When support for those sensors gets added to the driver, the
> > - * gain control should be adjusted accordingly.
> > */
> > v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> > - V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0);
> > + V4L2_CID_ANALOGUE_GAIN, 0,
> > + imx290->model->max_analog_gain, 1, 0);
> >
> > /*
> > * Correct range will be determined through imx290_ctrl_update setting
> > @@ -1441,18 +1438,21 @@ static const struct imx290_model_info imx290_models[] = {
> > .colour_variant = IMX290_VARIANT_COLOUR,
> > .init_regs = imx290_global_init_settings_290,
> > .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
> > + .max_analog_gain = 100,
> > .name = "imx290",
> > },
> > [IMX290_MODEL_IMX290LLR] = {
> > .colour_variant = IMX290_VARIANT_MONO,
> > .init_regs = imx290_global_init_settings_290,
> > .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
> > + .max_analog_gain = 100,
> > .name = "imx290",
> > },
> > [IMX290_MODEL_IMX327LQR] = {
> > .colour_variant = IMX290_VARIANT_COLOUR,
> > .init_regs = imx290_global_init_settings_327,
> > .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_327),
> > + .max_analog_gain = 98,
> > .name = "imx327",
> > },
> > };
> >
> >
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq-group.com/
>
>
More information about the linux-arm-kernel
mailing list