[PATCH v2 2/2] arm64: dt: imx93-tqma9352-mba93xxla: enable Open Drain for MDIO

[Alexander Stein]

From: Markus Niebel <Markus.Niebel at ew.tq-group.com>

The board has a pull-up resistor for MDIO pin per PHY design guide.
When MDIO is idle, it needs to be high and open drain is better
to be used here for power saving.

Signed-off-by: Markus Niebel <Markus.Niebel at ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
Changes in v2:
* Update commit message

 .../arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 0b4b3bb866d06..2e953a05c590e 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -597,8 +597,8 @@ pinctrl_eqos: eqosgrp {
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x51e
-			/* SION | HYS | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000111e
+			/* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x4000191e
 			/* HYS | FSEL_0 | DSE no drive */
 			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000
 			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000
@@ -629,8 +629,8 @@ pinctrl_fec: fecgrp {
 		fsl,pins = <
 			/* PD | FSEL_2 | DSE X4 */
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
-			/* SION | HYS | FSEL_2 | DSE X4 */
-			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000111e
+			/* SION | HYS | ODE | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000191e
 			/* HYS | FSEL_0 | DSE no drive */
 			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x1000
 			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x1000
-- 
2.34.1