[PATCH net 4/5] net: sparx5: fix default value of monitor ports

[Daniel Machon]

When doing port mirroring, the physical port to send the frame to, is
written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register.
This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has
a default value of 65 and 30, respectively (the number of front ports).

On mirror deletion, we set the default value of the monitor port to
65 for this field, in case no more ports exists for the mirror. Needless
to say, this will not fit the 6 bits on lan969x.

Fix this by correctly using the n_ports constant instead.

Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol")
Signed-off-by: Daniel Machon <daniel.machon at microchip.com>
---
 drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c b/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c
index 9806729e9c62..76097761fa97 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_mirror.c
@@ -12,7 +12,6 @@
 #define SPX5_MIRROR_DISABLED 0
 #define SPX5_MIRROR_EGRESS 1
 #define SPX5_MIRROR_INGRESS 2
-#define SPX5_MIRROR_MONITOR_PORT_DEFAULT 65
 #define SPX5_QFWD_MP_OFFSET 9 /* Mirror port offset in the QFWD register */
 
 /* Convert from bool ingress/egress to mirror direction */
@@ -200,7 +199,7 @@ void sparx5_mirror_del(struct sparx5_mall_entry *entry)
 
 	sparx5_mirror_monitor_set(sparx5,
 				  mirror_idx,
-				  SPX5_MIRROR_MONITOR_PORT_DEFAULT);
+				  sparx5->data->consts->n_ports);
 }
 
 void sparx5_mirror_stats(struct sparx5_mall_entry *entry,

-- 
2.34.1