[PATCH v4 3/4] arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode

[Siddharth Vadapalli]

Add overlay to enable the PCIE1 instance of PCIe on AM68-SK-Base-Board in
Endpoint mode of operation. PCIE1 on AM68-SK-Base-Board supports x2 Lane
operation unlike its counterpart on J721S2-EVM which supports x1 Lane.

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---

This patch has been newly introduced in this series.

 arch/arm64/boot/dts/ti/Makefile               |  4 ++
 .../ti/k3-am68-sk-base-board-pcie1-ep.dtso    | 53 +++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 03bacbc589ee..04438f7136b8 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo
 
 # Boards with J721s2 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
@@ -193,6 +194,8 @@ k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
 k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-am68-sk-base-board-pcie1-ep-dtbs := k3-am68-sk-base-board.dtb \
+	k3-am68-sk-base-board-pcie1-ep.dtbo
 k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-j7200-evm-pcie1-ep-dtbs := k3-j7200-common-proc-board.dtb \
@@ -232,6 +235,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
 	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
+	k3-am68-sk-base-board-pcie1-ep.dtb \
 	k3-am69-sk-csi2-dual-imx219.dtb \
 	k3-j7200-evm-pcie1-ep.dtb \
 	k3-j721e-common-proc-board-infotainment.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
new file mode 100644
index 000000000000..455736e378cc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * AM68-SK board.
+ *
+ * AM68-SK Board Product Link: https://www.ti.com/tool/SK-AM68
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep at 2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+	};
+};
-- 
2.43.0