[PATCH] dt-bindings: dma: atmel: Convert to json schema

[Charan Pedumuru]

Convert old text based binding to json schema.
Changes during conversion:
- Add the required properties `clock` and `clock-names`, which were
  missing in the original binding.
- Add a fallback for `microchip,sam9x7-dma` and `microchip,sam9x60-dma`
  as they are compatible with the dma IP core on `atmel,sama5d4-dma`.
- Update examples and include appropriate file directives to resolve
  errors identified by `dt_binding_check` and `dtbs_check`.

Signed-off-by: Charan Pedumuru <charan.pedumuru at microchip.com>
---
 .../devicetree/bindings/dma/atmel,sama5d4-dma.yaml | 79 ++++++++++++++++++++++
 .../devicetree/bindings/dma/atmel-xdma.txt         | 54 ---------------
 2 files changed, 79 insertions(+), 54 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml b/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml
new file mode 100644
index 000000000000..9ca1c5d1f00f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/atmel,sama5d4-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 Extensible Direct Memory Access Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre at microchip.com>
+  - Charan Pedumuru <charan.pedumuru at microchip.com>
+
+description:
+  The DMA Controller (XDMAC) is a AHB-protocol central direct memory access
+  controller. It performs peripheral data transfer and memory move operations
+  over one or two bus ports through the unidirectional communication
+  channel. Each channel is fully programmable and provides both peripheral
+  or memory-to-memory transfers. The channel features are configurable at
+  implementation.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,sama5d4-dma
+          - microchip,sama7g5-dma
+      - items:
+          - enum:
+              - microchip,sam9x60-dma
+              - microchip,sam9x7-dma
+          - const: atmel,sama5d4-dma
+
+  "#dma-cells":
+    description: |
+      Represents the number of integer cells in the `dmas` property of client
+      devices. The single cell specifies the channel configuration register:
+        - bit 13: SIF (Source Interface Identifier) for memory interface.
+        - bit 14: DIF (Destination Interface Identifier) for peripheral interface.
+        - bit 30-24: PERID (Peripheral Identifier).
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dma_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dma-controller at f0008000 {
+        compatible = "atmel,sama5d4-dma";
+        reg = <0xf0008000 0x1000>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+        #dma-cells = <1>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+        clock-names = "dma_clk";
+    };
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
deleted file mode 100644
index 76d649b3a25d..000000000000
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Atmel Extensible Direct Memory Access Controller (XDMAC)
-
-* XDMA Controller
-Required properties:
-- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
-  "microchip,sama7g5-dma" or
-  "microchip,sam9x7-dma", "atmel,sama5d4-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain DMA interrupt.
-- #dma-cells: Must be <1>, used to represent the number of integer cells in
-the dmas property of client devices.
-  - The 1st cell specifies the channel configuration register:
-    - bit 13: SIF, source interface identifier, used to get the memory
-    interface identifier,
-    - bit 14: DIF, destination interface identifier, used to get the peripheral
-    interface identifier,
-    - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-dma1: dma-controller at f0004000 {
-	compatible = "atmel,sama5d4-dma";
-	reg = <0xf0004000 0x200>;
-	interrupts = <50 4 0>;
-	#dma-cells = <1>;
-};
-
-
-* DMA clients
-DMA clients connected to the Atmel XDMA controller must use the format
-described in the dma.txt file, using a one-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. Channel configuration register. Configurable fields are:
-    - bit 13: SIF, source interface identifier, used to get the memory
-    interface identifier,
-    - bit 14: DIF, destination interface identifier, used to get the peripheral
-    interface identifier,
-  - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-i2c2: i2c at f8024000 {
-	compatible = "atmel,at91sam9x5-i2c";
-	reg = <0xf8024000 0x4000>;
-	interrupts = <34 4 6>;
-	dmas = <&dma1
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-		 | AT91_XDMAC_DT_PERID(6))>,
-	       <&dma1
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-		| AT91_XDMAC_DT_PERID(7))>;
-	dma-names = "tx", "rx";
-};

---
base-commit: 85a2dd7d7c8152cb125712a1ecae1d0a6ccac250
change-id: 20241125-xdma-985c6c48ebd5

Best regards,
-- 
Charan Pedumuru <charan.pedumuru at microchip.com>