[PATCH v4 0/4] firmware: imx: secvio: Add secvio support

[Krzysztof Kozlowski]

On Thu, Dec 05, 2024 at 05:56:31AM +0100, Vabhav Sharma wrote:
> The tampers are security feature available on i.MX products and
> managed by SNVS block.The tamper goal is to detect the variation
> of hardware or physical parameters, which can indicate an attack.
> 
> The SNVS, which provides secure non-volatile storage, allows to
> detect some hardware attacks against the SoC.They are connected
> to the security-violation ports, which send an alert when an
> out-of-range value is detected.
> 
> This detection is done by:
> -Analog tampers: measure analogic values
> 	- External clock frequency.
> 	- Temperature.
> 	- Voltage.
> 
> - Digital tampers:
> 	- External tamper
> 	- Other detectors:
> 		- Secure real-time counter rollover tamper.
> 		- Monotonic counter rollover tamper.
> 		- Power supply glitch tamper.
> 
> The on-chip sensors for voltage, temperature, and clock frequency
> indicate if tamper scenarios may be present. These sensors generate an
> out-of-range signal that causes a security violation to clear the
> authentication and storage keys and to block access to sensitive
> information.
> 
> Add linux module secvio driver to handle security violation interrupt.
> 
> The "imx-secvio-sc" module is designed to report security violations
> and tamper triggering to the user.
> 
> The functionalities of the module are accessible via the "debugfs"
> kernel.The folder containing the interface files for the module is
> "<kernel_debugfs>/secvio/".


Debugfs is for debugging, not accessing functions. Come with proper
sysfs or other control interface and its ABI, not debugging one to avoid
any review.

Best regards,
Krzysztof