[PATCH net v3 1/2] net: ti: icssg-prueth: Fix firmware load sequence.
Kalesh Anakkur Purayil
kalesh-anakkur.purayil at broadcom.com
Thu Dec 5 01:10:28 PST 2024
On Thu, Dec 5, 2024 at 1:59 PM Meghana Malladi <m-malladi at ti.com> wrote:
>
> From: MD Danish Anwar <danishanwar at ti.com>
>
> Timesync related operations are ran in PRU0 cores for both ICSSG SLICE0
> and SLICE1. Currently whenever any ICSSG interface comes up we load the
> respective firmwares to PRU cores and whenever interface goes down, we
> stop the resective cores. Due to this, when SLICE0 goes down while
> SLICE1 is still active, PRU0 firmwares are unloaded and PRU0 core is
> stopped. This results in clock jump for SLICE1 interface as the timesync
> related operations are no longer running.
>
> As there are interdependencies between SLICE0 and SLICE1 firmwares,
> fix this by running both PRU0 and PRU1 firmwares as long as at least 1
> ICSSG interface is up. Add new flag in prueth struct to check if all
> firmwares are running.
>
> Use emacs_initialized as reference count to load the firmwares for the
> first and last interface up/down. Moving init_emac_mode and fw_offload_mode
> API outside of icssg_config to icssg_common_start API as they need
> to be called only once per firmware boot.
>
> Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver")
> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
> Signed-off-by: Meghana Malladi <m-malladi at ti.com>
> ---
>
> Hi all,
>
> This patch is based on net-next tagged next-20241128.
> v2:https://lore.kernel.org/all/20241128122931.2494446-2-m-malladi@ti.com/
>
> * Changes since v2 (v3-v2):
> - error handling in caller function of prueth_emac_common_start()
> - Use prus_running flag check before stopping the firmwares
> Both suggested by Roger Quadros <rogerq at kernel.org>
>
> drivers/net/ethernet/ti/icssg/icssg_config.c | 45 ++++--
> drivers/net/ethernet/ti/icssg/icssg_config.h | 1 +
> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 157 ++++++++++++-------
> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 5 +
> 4 files changed, 140 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
> index 5d2491c2943a..342150756cf7 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
> @@ -397,7 +397,7 @@ static int prueth_emac_buffer_setup(struct prueth_emac *emac)
> return 0;
> }
>
> -static void icssg_init_emac_mode(struct prueth *prueth)
> +void icssg_init_emac_mode(struct prueth *prueth)
> {
> /* When the device is configured as a bridge and it is being brought
> * back to the emac mode, the host mac address has to be set as 0.
> @@ -406,9 +406,6 @@ static void icssg_init_emac_mode(struct prueth *prueth)
> int i;
> u8 mac[ETH_ALEN] = { 0 };
>
> - if (prueth->emacs_initialized)
> - return;
> -
> /* Set VLAN TABLE address base */
> regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK,
> addr << SMEM_VLAN_OFFSET);
> @@ -423,15 +420,13 @@ static void icssg_init_emac_mode(struct prueth *prueth)
> /* Clear host MAC address */
> icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
> }
> +EXPORT_SYMBOL_GPL(icssg_init_emac_mode);
>
> -static void icssg_init_fw_offload_mode(struct prueth *prueth)
> +void icssg_init_fw_offload_mode(struct prueth *prueth)
> {
> u32 addr = prueth->shram.pa + EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET;
> int i;
>
> - if (prueth->emacs_initialized)
> - return;
> -
> /* Set VLAN TABLE address base */
> regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK,
> addr << SMEM_VLAN_OFFSET);
> @@ -448,6 +443,7 @@ static void icssg_init_fw_offload_mode(struct prueth *prueth)
> icssg_class_set_host_mac_addr(prueth->miig_rt, prueth->hw_bridge_dev->dev_addr);
> icssg_set_pvid(prueth, prueth->default_vlan, PRUETH_PORT_HOST);
> }
> +EXPORT_SYMBOL_GPL(icssg_init_fw_offload_mode);
>
> int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
> {
> @@ -455,11 +451,6 @@ int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
> struct icssg_flow_cfg __iomem *flow_cfg;
> int ret;
>
> - if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
> - icssg_init_fw_offload_mode(prueth);
> - else
> - icssg_init_emac_mode(prueth);
> -
> memset_io(config, 0, TAS_GATE_MASK_LIST0);
> icssg_miig_queues_init(prueth, slice);
>
> @@ -786,3 +777,31 @@ void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port)
> writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET);
> }
> EXPORT_SYMBOL_GPL(icssg_set_pvid);
> +
> +int emac_fdb_flow_id_updated(struct prueth_emac *emac)
> +{
> + struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
> + int slice = prueth_emac_slice(emac);
> + struct mgmt_cmd fdb_cmd = { 0 };
> + int ret = 0;
[Kalesh] There is no need to initialize "ret" here
> +
> + fdb_cmd.header = ICSSG_FW_MGMT_CMD_HEADER;
> + fdb_cmd.type = ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW;
> + fdb_cmd.seqnum = ++(emac->prueth->icssg_hwcmdseq);
> + fdb_cmd.param = 0;
> +
> + fdb_cmd.param |= (slice << 4);
> + fdb_cmd.cmd_args[0] = 0;
> +
> + ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp);
> +
[Kalesh] There is no need of an new line here
> + if (ret)
> + return ret;
> +
> + WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum);
> + if (fdb_cmd_rsp.status == 1)
> + return 0;
> +
> + return -EINVAL;
[Kalesh] Maybe you can simplify this as:
return fdb_cmd_rsp.status == 1 ? 0 : -EINVAL;
> +}
> +EXPORT_SYMBOL_GPL(emac_fdb_flow_id_updated);
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
> index 92c2deaa3068..c884e9fa099e 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
> @@ -55,6 +55,7 @@ struct icssg_rxq_ctx {
> #define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
> #define ICSSG_FW_MGMT_CMD_TYPE 0x04
> #define ICSSG_FW_MGMT_PKT 0x80000000
> +#define ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW 0x05
>
> struct icssg_r30_cmd {
> u32 cmd[4];
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> index c568c84a032b..2e22e793b01a 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
> @@ -164,11 +164,11 @@ static struct icssg_firmwares icssg_emac_firmwares[] = {
> }
> };
>
> -static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
> +static int prueth_emac_start(struct prueth *prueth, int slice)
> {
> struct icssg_firmwares *firmwares;
> struct device *dev = prueth->dev;
> - int slice, ret;
> + int ret;
>
> if (prueth->is_switch_mode)
> firmwares = icssg_switch_firmwares;
> @@ -177,16 +177,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
> else
> firmwares = icssg_emac_firmwares;
>
> - slice = prueth_emac_slice(emac);
> - if (slice < 0) {
> - netdev_err(emac->ndev, "invalid port\n");
> - return -EINVAL;
> - }
> -
> - ret = icssg_config(prueth, emac, slice);
> - if (ret)
> - return ret;
> -
> ret = rproc_set_firmware(prueth->pru[slice], firmwares[slice].pru);
> ret = rproc_boot(prueth->pru[slice]);
> if (ret) {
> @@ -208,7 +198,6 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
> goto halt_rtu;
> }
>
> - emac->fw_running = 1;
> return 0;
>
> halt_rtu:
> @@ -220,6 +209,80 @@ static int prueth_emac_start(struct prueth *prueth, struct prueth_emac *emac)
> return ret;
> }
>
> +static int prueth_emac_common_start(struct prueth *prueth)
> +{
> + struct prueth_emac *emac;
> + int ret = 0;
> + int slice;
> +
> + if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
> + return -EINVAL;
> +
> + /* clear SMEM and MSMC settings for all slices */
> + memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
> + memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
> +
> + icssg_class_default(prueth->miig_rt, ICSS_SLICE0, 0, false);
> + icssg_class_default(prueth->miig_rt, ICSS_SLICE1, 0, false);
> +
> + if (prueth->is_switch_mode || prueth->is_hsr_offload_mode)
> + icssg_init_fw_offload_mode(prueth);
> + else
> + icssg_init_emac_mode(prueth);
> +
> + for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
> + emac = prueth->emac[slice];
> + if (emac) {
> + ret |= icssg_config(prueth, emac, slice);
> + if (ret)
> + return ret;
> + }
> + ret |= prueth_emac_start(prueth, slice);
> + }
> + if (!ret)
> + prueth->prus_running = 1;
> + else
> + return ret;
[Kalesh] This will read better if you change the condition check like:
if (ret)
return ret;
prueth->prus_running = 1;
> +
> + emac = prueth->emac[ICSS_SLICE0] ? prueth->emac[ICSS_SLICE0] :
> + prueth->emac[ICSS_SLICE1];
> + ret = icss_iep_init(emac->iep, &prueth_iep_clockops,
> + emac, IEP_DEFAULT_CYCLE_TIME_NS);
> + if (ret) {
> + dev_err(prueth->dev, "Failed to initialize IEP module\n");
> + return ret;
> + }
> +
> + return 0;
[Kalesh] You can "return ret" here and remove the return from above if
condition.
> +}
> +
> +static int prueth_emac_common_stop(struct prueth *prueth)
> +{
> + struct prueth_emac *emac;
> + int slice;
> +
> + if (!prueth->emac[ICSS_SLICE0] && !prueth->emac[ICSS_SLICE1])
> + return -EINVAL;
> +
> + icssg_class_disable(prueth->miig_rt, ICSS_SLICE0);
> + icssg_class_disable(prueth->miig_rt, ICSS_SLICE1);
> +
> + for (slice = 0; slice < PRUETH_NUM_MACS; slice++) {
> + if (prueth->prus_running) {
> + rproc_shutdown(prueth->txpru[slice]);
> + rproc_shutdown(prueth->rtu[slice]);
> + rproc_shutdown(prueth->pru[slice]);
> + }
> + }
> + prueth->prus_running = 0;
> +
> + emac = prueth->emac[ICSS_SLICE0] ? prueth->emac[ICSS_SLICE0] :
> + prueth->emac[ICSS_SLICE1];
> + icss_iep_exit(emac->iep);
> +
> + return 0;
> +}
> +
> /* called back by PHY layer if there is change in link state of hw port*/
> static void emac_adjust_link(struct net_device *ndev)
> {
> @@ -369,12 +432,13 @@ static void prueth_iep_settime(void *clockops_data, u64 ns)
> {
> struct icssg_setclock_desc __iomem *sc_descp;
> struct prueth_emac *emac = clockops_data;
> + struct prueth *prueth = emac->prueth;
> struct icssg_setclock_desc sc_desc;
> u64 cyclecount;
> u32 cycletime;
> int timeout;
>
> - if (!emac->fw_running)
> + if (!prueth->prus_running)
> return;
>
> sc_descp = emac->prueth->shram.va + TIMESYNC_FW_WC_SETCLOCK_DESC_OFFSET;
> @@ -543,23 +607,17 @@ static int emac_ndo_open(struct net_device *ndev)
> {
> struct prueth_emac *emac = netdev_priv(ndev);
> int ret, i, num_data_chn = emac->tx_ch_num;
> + struct icssg_flow_cfg __iomem *flow_cfg;
> struct prueth *prueth = emac->prueth;
> int slice = prueth_emac_slice(emac);
> struct device *dev = prueth->dev;
> int max_rx_flows;
> int rx_flow;
>
> - /* clear SMEM and MSMC settings for all slices */
> - if (!prueth->emacs_initialized) {
> - memset_io(prueth->msmcram.va, 0, prueth->msmcram.size);
> - memset_io(prueth->shram.va, 0, ICSSG_CONFIG_OFFSET_SLICE1 * PRUETH_NUM_MACS);
> - }
> -
> /* set h/w MAC as user might have re-configured */
> ether_addr_copy(emac->mac_addr, ndev->dev_addr);
>
> icssg_class_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
> - icssg_class_default(prueth->miig_rt, slice, 0, false);
> icssg_ft1_set_mac_addr(prueth->miig_rt, slice, emac->mac_addr);
>
> /* Notify the stack of the actual queue counts. */
> @@ -597,18 +655,23 @@ static int emac_ndo_open(struct net_device *ndev)
> goto cleanup_napi;
> }
>
> - /* reset and start PRU firmware */
> - ret = prueth_emac_start(prueth, emac);
> - if (ret)
> - goto free_rx_irq;
> + if (!prueth->emacs_initialized) {
> + ret = prueth_emac_common_start(prueth);
> + if (ret)
> + goto stop;
> + }
>
> - icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
> + flow_cfg = emac->dram.va + ICSSG_CONFIG_OFFSET + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
> + writew(emac->rx_flow_id_base, &flow_cfg->rx_base_flow);
> + ret = emac_fdb_flow_id_updated(emac);
>
> - if (!prueth->emacs_initialized) {
> - ret = icss_iep_init(emac->iep, &prueth_iep_clockops,
> - emac, IEP_DEFAULT_CYCLE_TIME_NS);
> + if (ret) {
> + netdev_err(ndev, "Failed to update Rx Flow ID %d", ret);
> + goto stop;
> }
>
> + icssg_mii_update_mtu(prueth->mii_rt, slice, ndev->max_mtu);
> +
> ret = request_threaded_irq(emac->tx_ts_irq, NULL, prueth_tx_ts_irq,
> IRQF_ONESHOT, dev_name(dev), emac);
> if (ret)
> @@ -653,8 +716,7 @@ static int emac_ndo_open(struct net_device *ndev)
> free_tx_ts_irq:
> free_irq(emac->tx_ts_irq, emac);
> stop:
> - prueth_emac_stop(emac);
> -free_rx_irq:
> + prueth_emac_common_stop(prueth);
> free_irq(emac->rx_chns.irq[rx_flow], emac);
> cleanup_napi:
> prueth_ndev_del_tx_napi(emac, emac->tx_ch_num);
> @@ -689,8 +751,6 @@ static int emac_ndo_stop(struct net_device *ndev)
> if (ndev->phydev)
> phy_stop(ndev->phydev);
>
> - icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
> -
> if (emac->prueth->is_hsr_offload_mode)
> __dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast);
> else
> @@ -728,11 +788,9 @@ static int emac_ndo_stop(struct net_device *ndev)
> /* Destroying the queued work in ndo_stop() */
> cancel_delayed_work_sync(&emac->stats_work);
>
> - if (prueth->emacs_initialized == 1)
> - icss_iep_exit(emac->iep);
> -
> /* stop PRUs */
> - prueth_emac_stop(emac);
> + if (prueth->emacs_initialized == 1)
> + prueth_emac_common_stop(prueth);
>
> free_irq(emac->tx_ts_irq, emac);
>
> @@ -1069,16 +1127,10 @@ static void prueth_emac_restart(struct prueth *prueth)
> icssg_set_port_state(emac1, ICSSG_EMAC_PORT_DISABLE);
>
> /* Stop both pru cores for both PRUeth ports*/
> - prueth_emac_stop(emac0);
> - prueth->emacs_initialized--;
> - prueth_emac_stop(emac1);
> - prueth->emacs_initialized--;
> + prueth_emac_common_stop(prueth);
>
> /* Start both pru cores for both PRUeth ports */
> - prueth_emac_start(prueth, emac0);
> - prueth->emacs_initialized++;
> - prueth_emac_start(prueth, emac1);
> - prueth->emacs_initialized++;
> + prueth_emac_common_start(prueth);
>
> /* Enable forwarding for both PRUeth ports */
> icssg_set_port_state(emac0, ICSSG_EMAC_PORT_FORWARD);
> @@ -1413,13 +1465,10 @@ static int prueth_probe(struct platform_device *pdev)
> prueth->pa_stats = NULL;
> }
>
> - if (eth0_node) {
> + if (eth0_node || eth1_node) {
> ret = prueth_get_cores(prueth, ICSS_SLICE0, false);
> if (ret)
> goto put_cores;
> - }
> -
> - if (eth1_node) {
> ret = prueth_get_cores(prueth, ICSS_SLICE1, false);
> if (ret)
> goto put_cores;
> @@ -1618,14 +1667,12 @@ static int prueth_probe(struct platform_device *pdev)
> pruss_put(prueth->pruss);
>
> put_cores:
> - if (eth1_node) {
> - prueth_put_cores(prueth, ICSS_SLICE1);
> - of_node_put(eth1_node);
> - }
> -
> - if (eth0_node) {
> + if (eth0_node || eth1_node) {
> prueth_put_cores(prueth, ICSS_SLICE0);
> of_node_put(eth0_node);
> +
> + prueth_put_cores(prueth, ICSS_SLICE1);
> + of_node_put(eth1_node);
> }
>
> return ret;
> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> index f5c1d473e9f9..b30f2e9a73d8 100644
> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
> @@ -257,6 +257,7 @@ struct icssg_firmwares {
> * @is_switchmode_supported: indicates platform support for switch mode
> * @switch_id: ID for mapping switch ports to bridge
> * @default_vlan: Default VLAN for host
> + * @prus_running: flag to indicate if all pru cores are running
> */
> struct prueth {
> struct device *dev;
> @@ -298,6 +299,7 @@ struct prueth {
> int default_vlan;
> /** @vtbl_lock: Lock for vtbl in shared memory */
> spinlock_t vtbl_lock;
> + bool prus_running;
> };
>
> struct emac_tx_ts_response {
> @@ -361,6 +363,8 @@ int icssg_set_port_state(struct prueth_emac *emac,
> enum icssg_port_state_cmd state);
> void icssg_config_set_speed(struct prueth_emac *emac);
> void icssg_config_half_duplex(struct prueth_emac *emac);
> +void icssg_init_emac_mode(struct prueth *prueth);
> +void icssg_init_fw_offload_mode(struct prueth *prueth);
>
> /* Buffer queue helpers */
> int icssg_queue_pop(struct prueth *prueth, u8 queue);
> @@ -377,6 +381,7 @@ void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask,
> u8 untag_mask, bool add);
> u16 icssg_get_pvid(struct prueth_emac *emac);
> void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port);
> +int emac_fdb_flow_id_updated(struct prueth_emac *emac);
> #define prueth_napi_to_tx_chn(pnapi) \
> container_of(pnapi, struct prueth_tx_chn, napi_tx)
>
> --
> 2.25.1
>
>
--
Regards,
Kalesh A P
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4239 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20241205/23d231b5/attachment.p7s>
More information about the linux-arm-kernel
mailing list