[PATCH 2/3] ARM: dts: suniv: f1c100s: Add support for Audio Codec

[Csókás, Bence]

From: Mesih Kilinc <mesihkilinc at gmail.com>

Allwinner suniv F1C100s now has basic audio codec support. Enable it
under device tree.

Signed-off-by: Mesih Kilinc <mesihkilinc at gmail.com>
[ csokas.bence: Rebased on current master ]
Signed-off-by: Csókás, Bence <csokas.bence at prolan.hu>
---
 arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
index 290efe026ceb..e4b41bc93852 100644
--- a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -336,5 +336,19 @@ uart2: serial at 1c25800 {
 			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
+
+		codec: codec at 1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.34.1