[PATCH v3 1/3] dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swing

[Krzysztof Kozlowski]

On Tue, Dec 03, 2024 at 12:00:52PM +0100, Andrej Picej wrote:
> Add properties which can be used to specify LVDS differential output
> voltage. Since this also depends on near-end signal termination also
> include property which sets this. LVDS differential output voltage is
> specified with an array (min, max), which should match the one from
> connected device.
> 
> Signed-off-by: Andrej Picej <andrej.picej at norik.com>
> ---
> Changes in v3:
> - no change


One version of patchset per 24h.

> Changes in v2:
> - move LVDS port schema to a $defs and reference it from there
> - properties are now defined in microvolts/ohms
> - use 1 property for data-lane and 1 for clock-lane LVDS voltage swing
> - add 1 property which sets LVDS near-end termination
> - since major change was done change the authorship to myself
> ---
>  .../bindings/display/bridge/ti,sn65dsi83.yaml | 36 +++++++++++++++++--
>  1 file changed, 33 insertions(+), 3 deletions(-)

...

>  allOf:
>    - if:
>        properties:
> @@ -120,7 +150,7 @@ allOf:
>            properties:
>              port at 1: false
>  
> -additionalProperties: false
> +additionalProperties: true

This cannot be true. Not explained in commit msg and this is not shared
schema.

>  
>  examples:
>    - |
> -- 
> 2.34.1
>