[PATCH 6/6] rtc: interface: Ensure alarm irq is enabled when UIE is enabled

[Esben Haabendal]

When setting a normal alarm, user-space is responsible for using
RTC_AIE_ON/RTC_AIE_OFF to control if alarm irq should be enabled.

But when RTC_UIE_ON is used, interrupts must be so that the requested
irq events are generated.
When RTC_UIE_OFF is used, alarm irq is disabled if there are no other
alarms queued, so this commit brings symmetry to that.

Signed-off-by: Esben Haabendal <esben at geanix.com>
Cc: stable at vger.kernel.org
---
 drivers/rtc/interface.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index e365e8fd166db31f8b44fac9fb923d36881b1394..39db12f267cc627febb78e67400aaf8fc3301b0c 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -617,6 +617,10 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled)
 		rtc->uie_rtctimer.node.expires = ktime_add(now, onesec);
 		rtc->uie_rtctimer.period = ktime_set(1, 0);
 		err = rtc_timer_enqueue(rtc, &rtc->uie_rtctimer);
+		if (!err && rtc->ops && rtc->ops->alarm_irq_enable)
+			err = rtc->ops->alarm_irq_enable(rtc->dev.parent, 1);
+		if (err)
+			goto out;
 	} else {
 		rtc_timer_remove(rtc, &rtc->uie_rtctimer);
 	}

-- 
2.47.1