[PATCH v3 0/4] Add i.MX91 platform support

[Frank Li]

On Mon, Dec 02, 2024 at 03:24:44PM +0800, Pengfei Li wrote:
> On Wed, Nov 20, 2024 at 05:49:41PM +0800, Pengfei Li wrote:
> > The design of the i.MX91 platform is very similar to i.MX93.
> > The mainly difference between i.MX91 and i.MX93 is as follows:
> > - i.MX91 removed some clocks and modified the names of some clocks.
> > - i.MX91 only has one A core
> > - i.MX91 has different pinmux
> >
> > Therefore, i.MX91 can reuse i.MX93 dtsi.
> >
> > ---
> > Change for v3:
> > - Add Conor's ack on patch #1
> > - format imx91-11x11-evk.dts with the dt-format tool
> > - add lpi2c1 node
> > - link to v2: https://lore.kernel.org/all/20241118051541.2621360-1-pengfei.li_1@nxp.com/
> >
> > Pengfei Li (4):
> >   dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
> >   arm64: dts: freescale: Add i.MX91 dtsi support
> >   arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
> >   arm64: defconfig: enable i.MX91 pinctrl
> >
> >  .../devicetree/bindings/arm/fsl.yaml          |   6 +
> >  arch/arm64/boot/dts/freescale/Makefile        |   1 +
> >  .../boot/dts/freescale/imx91-11x11-evk.dts    | 875 ++++++++++++++++++
> >  arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 +++++++++++++++
> >  arch/arm64/boot/dts/freescale/imx91.dtsi      |  70 ++
> >  arch/arm64/configs/defconfig                  |   1 +
> >  6 files changed, 1723 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
> >  create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
> >  create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
> >
> > --
> > 2.34.1
> >
> >
>
> Hi Rob Herring,
>
> I haven't received any comments from others about this version of the patch set, is this patch set applicable?

Pengfei:

	Conor Dooley have acked binding patch. Wait for guo shawn pick up
these. v6.13-rc1 just create.

Frank


>
> BR,
> Pengfei Li
>