[PATCH 2/2] arm64: dts: allwinner: a100: Add syscon nodes

[Parthiban]

On 12/2/24 10:13 AM, Cody Eksal wrote:
> The Allwinner A100 has a system configuration block, denoted as SYS_CFG
> in the user manual's memory map. It is undocumented in the manual, but
> a glance at the vendor tree shows this block is similar to its
> predecessors in the A64 and H6. The A100 also has 3 SRAM blocks: A1, A2,
> and C. Add all of these to the SoC's device tree.
> 
> Signed-off-by: Cody Eksal <masterr3c0rd at epochal.quest>
Reviewed-by: Parthiban Nallathambi <parthiban at linumiz.com>

Thanks,
Parthiban
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 31 ++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index 29ac7716c7a5284ccf8af675db9c7d016785f0ff..31540a7ca1f01c6c2e69e329054aca16ffd112c4 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -101,6 +101,37 @@ soc {
>  		#size-cells = <1>;
>  		ranges = <0 0 0 0x3fffffff>;
>  
> +		syscon: syscon at 3000000 {
> +			compatible = "allwinner,sun50i-a100-system-control",
> +				     "allwinner,sun50i-a64-system-control";
> +			reg = <0x03000000 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			sram_a1: sram at 20000 {
> +				compatible = "mmio-sram";
> +				reg = <0x00020000 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x00020000 0x4000>;
> +			};
> +			sram_c: sram at 24000 {
> +				compatible = "mmio-sram";
> +				reg = <0x024000 0x21000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x024000 0x21000>;
> +			};
> +			sram_a2: sram at 100000 {
> +				compatible = "mmio-sram";
> +				reg = <0x0100000 0x14000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x0100000 0x14000>;
> +			};
> +		};
> +
>  		ccu: clock at 3001000 {
>  			compatible = "allwinner,sun50i-a100-ccu";
>  			reg = <0x03001000 0x1000>;
>