[PATCH v4 1/3] dt-bindings: clock: fix C3 PLL input parameter

[Neil Armstrong]

Hi Jerome,

On 30/08/2024 07:26, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
> 
> Add C3 PLL controller input clock parameters "fix".
> 
> The clock named "fix" was initially implemented in PLL clock controller
> driver. However, some registers required secure zone access, so we moved
> it to the secure zone (BL31) and accessed it through SCMI. Since the PLL
> clock driver needs to use this clock, the "fix" clock is used as an input
> source. We updated the driver but forgot to modify the binding accordingly,
> so we are adding it here.
> 
> It is an ABI break but on a new and immature platform. Noboby could really
> use that platform at this stage, so nothing is going to break on anyone
> really.
> 
> Fixes: 0e6be855a96d ("dt-bindings: clock: add Amlogic C3 PLL clock controller")
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
> ---
>   Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml | 7 +++++--

So you mind if I take this one via my arm64-dt tree ?

Neil

<snip>