[PATCH 2/5] i2c: imx-lpi2c: add IRQF_NO_SUSPEND IRQ flag

[carlos.song at nxp.com]

From: Carlos Song <carlos.song at nxp.com>

Set IRQF_NO_SUSPEND flag when request_irq(). Some devices such
as extend GPIO will need i2c transfer during the entire system
suspend and resume period so keep it enabled.

Signed-off-by: Carlos Song <carlos.song at nxp.com>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index c8f3dadfb36e..23f83f10d5f6 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -1309,7 +1309,7 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	if (ret)
 		lpi2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 
-	ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
+	ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, IRQF_NO_SUSPEND,
 			       pdev->name, lpi2c_imx);
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "can't claim irq %d\n", irq);
-- 
2.34.1