[PATCH 2/2] arm64: dts: ti: iot2050: Add overlays for M.2 used by firmware

[Krzysztof Kozlowski]

On 27/08/2024 18:20, Jan Kiszka wrote:
> On 27.08.24 17:33, Rob Herring wrote:
>> On Mon, Aug 26, 2024 at 9:29 AM Jan Kiszka <jan.kiszka at siemens.com> wrote:
>>>
>>> From: Jan Kiszka <jan.kiszka at siemens.com>
>>>
>>> To allow firmware to pick up all DTs from here, move the overlays that
>>> are normally applied during DT fixup to the kernel source as well. Hook
>>> then into the build nevertheless to ensure that regular checks are
>>> performed.
>>>
>>> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
>>> ---
>>>  arch/arm64/boot/dts/ti/Makefile               |  2 +
>>>  ...48-iot2050-advanced-m2-bkey-ekey-pcie.dtso | 27 +++++++++++
>>>  ...-am6548-iot2050-advanced-m2-bkey-usb3.dtso | 47 +++++++++++++++++++
>>>  3 files changed, 76 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtso
>>>  create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtso
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
>>> index e20b27ddf901..f459af7fac0d 100644
>>> --- a/arch/arm64/boot/dts/ti/Makefile
>>> +++ b/arch/arm64/boot/dts/ti/Makefile
>>> @@ -77,6 +77,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
>>>  dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
>>>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
>>>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
>>> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtbo
>>> +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2-bkey-usb3.dtbo
>>
>> You are missing applying these overlays to anything. That is a
>> requirement for any overlay in the tree.
> 
> You mean apply for testing purposes? How, technically?

Apply as build a target combining base DTS and overlay. See all other
overlays for technical aspect (just do the same).

Best regards,
Krzysztof