[PATCH 3/3] arm64: dts: imx93-11x11-evk: Enable sound-wm8962 sound card

[Krzysztof Kozlowski]

On 26/08/2024 22:53, Frank Li wrote:
> From: Chancel Liu <chancel.liu at nxp.com>
> 
> Add wm8962 sound card which connects to sai3.

...

> +
>  &usbotg1 {
>  	dr_mode = "otg";
>  	hnp-disable;
> @@ -758,6 +816,26 @@ MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
>  		>;
>  	};
>  
> +	pinctrl_sai3: sai3grp {
> +		fsl,pins = <
> +			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC                0x31e
> +			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK                0x31e
> +			MX93_PAD_GPIO_IO17__SAI3_MCLK           0x31e
> +			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00              0x31e
> +			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00              0x31e
> +		>;
> +	};
> +
> +	pinctrl_sai3_sleep: sai3grpsleep {

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof