[PATCH] arm64: dts: s32g: Add S32G2/S32G3 uSDHC pinmux

[Rob Herring (Arm)]

On Tue, 27 Aug 2024 11:48:15 +0300, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
> 
> Adding 100mhz & 200mhz pinmux support for uSDHC helps to support
> higher speed modes for SD (SDR50, DDR50, SDR104) and
> eMMC (such as HS200, HS400/HS400ES).
> 
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/s32g2.dtsi      | 153 ++++++++++++++++++
>  .../arm64/boot/dts/freescale/s32g274a-evb.dts |   4 +
>  .../boot/dts/freescale/s32g274a-rdb2.dts      |   4 +
>  arch/arm64/boot/dts/freescale/s32g3.dtsi      | 153 ++++++++++++++++++
>  .../boot/dts/freescale/s32g399a-rdb3.dts      |   4 +
>  5 files changed, 318 insertions(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y freescale/s32g274a-evb.dtb freescale/s32g274a-rdb2.dtb freescale/s32g399a-rdb3.dtb' for 20240827084815.1931169-1-ciprianmarian.costea at oss.nxp.com:

arch/arm64/boot/dts/freescale/s32g274a-rdb2.dtb: pinctrl at 4009c240: 'usdhc0-100mhzgrp', 'usdhc0-200mhzgrp', 'usdhc0grp' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
arch/arm64/boot/dts/freescale/s32g274a-evb.dtb: pinctrl at 4009c240: 'usdhc0-100mhzgrp', 'usdhc0-200mhzgrp', 'usdhc0grp' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
arch/arm64/boot/dts/freescale/s32g399a-rdb3.dtb: pinctrl at 4009c240: 'usdhc0-100mhzgrp', 'usdhc0-200mhzgrp', 'usdhc0grp' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#