[PATCH] dts: nxp: mxs: Update device tree description for LWE imx28 based devices
Lukasz Majewski
lukma at denx.de
Tue Aug 27 05:26:08 PDT 2024
Hi Krzysztof,
> On 27/08/2024 10:42, Lukasz Majewski wrote:
> > The description for imx28 based devices needs to be updated after
> > some further development.
>
> Everything is an update, please be specific in commit subject and
> message.
Ok.
>
> >
> > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> > ---
> > arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi | 38
> > +++++++++--------------- 1 file changed, 14 insertions(+), 24
> > deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
> > b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi index
> > 69fcb0dde940..6fa1f3e25b08 100644 ---
> > a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi +++
> > b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi @@ -55,23 +55,6 @@ &i2c0
> > { status = "okay";
> > };
> >
> > -&saif0 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&saif0_pins_a>;
> > - #sound-dai-cells = <0>;
> > - assigned-clocks = <&clks 53>;
> > - assigned-clock-rates = <12000000>;
> > - status = "okay";
> > -};
> > -
> > -&saif1 {
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&saif1_pins_a>;
> > - fsl,saif-master = <&saif0>;
> > - #sound-dai-cells = <0>;
> > - status = "okay";
> > -};
> > -
> > &spi3_pins_a {
> > fsl,pinmux-ids = <
> > MX28_PAD_AUART2_RX__SSP3_D4
> > @@ -109,7 +92,7 @@ &ssp3 {
> >
> > flash at 0 {
> > compatible = "jedec,spi-nor";
> > - spi-max-frequency = <40000000>;
> > + spi-max-frequency = <20000000>;
> > reg = <0>;
> >
> > partitions {
> > @@ -133,14 +116,21 @@ partition at 90000 {
> > reg = <0x90000 0x10000>;
> > };
> >
> > - partition at 100000 {
> > - label = "kernel";
> > - reg = <0x100000 0x400000>;
> > + partition at 3 {
>
> This does not look right. It is neither explained in commit msg, nor
> matching reg.
The SPI-NOR memory layout has evolved during time lifetime of the
device - for example special partitions to keep track of booted devices
for A/B booting scheme was added.
>
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
Could you be more specific here?
For example:
CROSS_COMPILE="*-gcc" ARCH=arm make -j4 dtbs_check W=1
Show:
arch/arm/boot/dts/nxp/mxs/imx28-xea.dtb:
/apb at 80000000/apbx at 80040000/saif at 80042000: failed to match any schema
with compatible: ['fsl,imx28-saif']
Where the 'saif' sound driver is already supported:
git grep -n "fsl,imx28-saif"
Documentation/devicetree/bindings/sound/mxs-saif.txt:27: compatible = "fsl,imx28-saif";
Documentation/devicetree/bindings/sound/mxs-saif.txt:35: compatible = "fsl,imx28-saif";
arch/arm/boot/dts/nxp/mxs/imx28.dtsi:1110: compatible = "fsl,imx28-saif";
arch/arm/boot/dts/nxp/mxs/imx28.dtsi:1127: compatible = "fsl,imx28-saif";
Changes from this patch do not touch the generic imx28.{dtsi} code at
all.
I would assume, that the portion of my patch shall not bring any new,
extra warnings/errors?
>
> > + label = "rescue";
> > + reg = <0xA0000 0xF40000>;
>
> Lowercase hex
Ok.
>
> > + };
> > +
>
> Best regards,
> Krzysztof
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240827/57fab305/attachment.sig>
More information about the linux-arm-kernel
mailing list