[PATCH v2 0/2] Add support for multiple can instances as well as describe main_uart5

Bhavya Kapoor b-kapoor at ti.com
Tue Aug 27 03:56:42 PDT 2024


This series adds support for multiple can instances present on J722S
EVM as well as describe the main_uart5 for J722S EVM.

CAN instances 0 and 1 in the mcu domain and 0 in the main domain are
brought on the evm through headers J5, J8 and J10 respectively. Thus,
add their respective transceiver's 0, 1 and 2 dt nodes as well as
add the required pinmux to add support for these CAN instances.

Describe main_uart5 in device tree for completeness, adding the pinmux
and mark it as reserved since system firmware uses it in J722S EVM for
trace data.

Rebased to : next-20240827

Bhavya Kapoor (2):
  arm64: dts: ti: k3-j722s-evm: Add support for multiple CAN instances
  arm64: dts: ti: k3-j722s-evm: Describe main_uart5

 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 89 +++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

-- 
2.34.1




More information about the linux-arm-kernel mailing list