[PATCH v1 0/5] arm64: dts: imx8-apalis: Various improvements and additions

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

This series improves Toradex Apalis iMX8Q support adding:
 - correct thermal zones
 - analogue audio
 - USB Host (Apalis USBH4 interface)

In addition to these it also removes the adma_pwm from the i.MX8QM SoC dtsi, as
this IP is not available on this specific SoC.

Andrejs Cainikovs (2):
  arm: dts: imx8qm: Remove adma pwm
  arm64: dts: imx8-apalis: Set thermal thresholds

Hiago De Franco (1):
  arm64: dts: imx8-apalis: Add nau8822 audio-codec to apalis eval v1.2

João Paulo Gonçalves (2):
  arm64: dts: imx8-apalis: Add audio support
  arm64: dts: imx8-apalis: Add usb4 host support

 .../dts/freescale/imx8-apalis-eval-v1.2.dtsi  |  69 +++++++++
 .../boot/dts/freescale/imx8-apalis-eval.dtsi  |  31 +++-
 .../dts/freescale/imx8-apalis-ixora-v1.1.dtsi |  31 +++-
 .../dts/freescale/imx8-apalis-ixora-v1.2.dtsi |  31 +++-
 .../boot/dts/freescale/imx8-apalis-v1.1.dtsi  | 133 ++++++++++++++++--
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |   3 +
 6 files changed, 272 insertions(+), 26 deletions(-)

-- 
2.39.2