[PATCH v2 4/6] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes
Jan Kiszka
jan.kiszka at siemens.com
Mon Aug 26 14:50:05 PDT 2024
From: Jan Kiszka <jan.kiszka at siemens.com>
Rewrap the long lines at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index a8664b246795..c91969ddcf4d 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -867,8 +867,13 @@ main_gpio1: gpio at 601000 {
pcie0_rc: pcie at 5500000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
+ reg = <0x0 0x5500000 0x0 0x1000>,
+ <0x0 0x5501000 0x0 0x1000>,
+ <0x0 0x10000000 0x0 0x2000>,
+ <0x0 0x5506000 0x0 0x1000>,
+ <0x0 0x2900000 0x0 0x1000>,
+ <0x0 0x2908000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
@@ -888,8 +893,13 @@ pcie0_rc: pcie at 5500000 {
pcie1_rc: pcie at 5600000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
+ reg = <0x0 0x5600000 0x0 0x1000>,
+ <0x0 0x5601000 0x0 0x1000>,
+ <0x0 0x18000000 0x0 0x2000>,
+ <0x0 0x5606000 0x0 0x1000>,
+ <0x0 0x2910000 0x0 0x1000>,
+ <0x0 0x2918000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
--
2.43.0
More information about the linux-arm-kernel
mailing list