[PATCH v10 3/4] firmware: ti_sci: Introduce Power Management Ops
Nishanth Menon
nm at ti.com
Mon Aug 26 09:43:46 PDT 2024
On 08:39-20240814, Kevin Hilman wrote:
> From: Dave Gerlach <d-gerlach at ti.com>
>
[...]
> diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
> index 808149dcc635..107494406fa5 100644
> --- a/drivers/firmware/ti_sci.c
> +++ b/drivers/firmware/ti_sci.c
> @@ -1822,6 +1822,179 @@ static int ti_sci_cmd_set_io_isolation(const struct ti_sci_handle *handle,
> return ret;
> }
>
> +/**
> + * ti_sci_msg_cmd_lpm_wake_reason() - Get the wakeup source from LPM
> + * @handle: Pointer to TI SCI handle
> + * @source: The wakeup source that woke the SoC from LPM
> + * @timestamp: Timestamp of the wakeup event
> + * @pin: The pin that has triggered wake up
> + * @mode: The last entered low power mode
> + *
> + * Return: 0 if all went well, else returns appropriate error value.
> + */
> +static int ti_sci_msg_cmd_lpm_wake_reason(const struct ti_sci_handle *handle,
> + u32 *source, u64 *timestamp, u8 *pin, u8 *mode)
> +{
> + struct ti_sci_info *info;
> + struct ti_sci_xfer *xfer;
> + struct ti_sci_msg_resp_lpm_wake_reason *resp;
> + struct device *dev;
> + int ret = 0;
> +
> + if (IS_ERR(handle))
> + return PTR_ERR(handle);
> + if (!handle)
> + return -EINVAL;
> +
> + info = handle_to_ti_sci_info(handle);
> + dev = info->dev;
> +
> + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_LPM_WAKE_REASON,
> + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
> + sizeof(struct ti_sci_msg_hdr),
> + sizeof(*resp));
> + if (IS_ERR(xfer)) {
> + ret = PTR_ERR(xfer);
> + dev_err(dev, "Message alloc failed(%d)\n", ret);
> + return ret;
> + }
> +
> + ret = ti_sci_do_xfer(info, xfer);
> + if (ret) {
> + dev_err(dev, "Mbox send fail %d\n", ret);
> + goto fail;
> + }
> +
> + resp = (struct ti_sci_msg_resp_lpm_wake_reason *)xfer->xfer_buf;
> +
> + if (!ti_sci_is_response_ack(resp)) {
A dev_err might be worth here.
> + ret = -ENODEV;
> + goto fail;
> + }
> +
> + if (source)
> + *source = resp->wake_source;
> + if (timestamp)
> + *timestamp = resp->wake_timestamp;
> + if (pin)
> + *pin = resp->wake_pin;
> + if (mode)
> + *mode = resp->mode;
> +
> +fail:
> + ti_sci_put_one_xfer(&info->minfo, xfer);
> +
> + return ret;
> +}
> +
> +/**
> + * ti_sci_cmd_set_device_constraint() - Set LPM constraint on behalf of a device
> + * @handle: pointer to TI SCI handle
> + * @id: Device identifier
> + * @state: The desired state of device constraint: set or clear
> + *
> + * Return: 0 if all went well, else returns appropriate error value.
> + */
> +static int ti_sci_cmd_set_device_constraint(const struct ti_sci_handle *handle,
> + u32 id, u8 state)
> +{
> + struct ti_sci_info *info;
> + struct ti_sci_msg_req_lpm_set_device_constraint *req;
> + struct ti_sci_msg_hdr *resp;
> + struct ti_sci_xfer *xfer;
> + struct device *dev;
> + int ret = 0;
> +
> + if (IS_ERR(handle))
> + return PTR_ERR(handle);
> + if (!handle)
> + return -EINVAL;
> +
> + info = handle_to_ti_sci_info(handle);
> + dev = info->dev;
> +
> + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_LPM_SET_DEVICE_CONSTRAINT,
> + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
> + sizeof(*req), sizeof(*resp));
> + if (IS_ERR(xfer)) {
> + ret = PTR_ERR(xfer);
> + dev_err(dev, "Message alloc failed(%d)\n", ret);
> + return ret;
> + }
> + req = (struct ti_sci_msg_req_lpm_set_device_constraint *)xfer->xfer_buf;
> + req->id = id;
> + req->state = state;
> +
> + ret = ti_sci_do_xfer(info, xfer);
> + if (ret) {
> + dev_err(dev, "Mbox send fail %d\n", ret);
> + goto fail;
> + }
> +
> + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
> +
> + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
A dev_err might be worth here. - same elsewhere. I see a different style
of if (ret) vs ? 0: -ENODEV usage - might be good to be
consistent through out.
> +
> +fail:
> + ti_sci_put_one_xfer(&info->minfo, xfer);
> +
> + return ret;
> +}
> +
> +/**
> + * ti_sci_cmd_set_latency_constraint() - Set LPM resume latency constraint
> + * @handle: pointer to TI SCI handle
> + * @latency: maximum acceptable latency (in ms) to wake up from LPM
> + * @state: The desired state of latency constraint: set or clear
> + *
> + * Return: 0 if all went well, else returns appropriate error value.
> + */
> +static int ti_sci_cmd_set_latency_constraint(const struct ti_sci_handle *handle,
> + u16 latency, u8 state)
> +{
> + struct ti_sci_info *info;
> + struct ti_sci_msg_req_lpm_set_latency_constraint *req;
> + struct ti_sci_msg_hdr *resp;
> + struct ti_sci_xfer *xfer;
> + struct device *dev;
> + int ret = 0;
> +
> + if (IS_ERR(handle))
> + return PTR_ERR(handle);
> + if (!handle)
> + return -EINVAL;
> +
> + info = handle_to_ti_sci_info(handle);
> + dev = info->dev;
> +
> + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_LPM_SET_LATENCY_CONSTRAINT,
> + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
> + sizeof(*req), sizeof(*resp));
> + if (IS_ERR(xfer)) {
> + ret = PTR_ERR(xfer);
> + dev_err(dev, "Message alloc failed(%d)\n", ret);
> + return ret;
> + }
> + req = (struct ti_sci_msg_req_lpm_set_latency_constraint *)xfer->xfer_buf;
> + req->latency = latency;
> + req->state = state;
> +
> + ret = ti_sci_do_xfer(info, xfer);
> + if (ret) {
> + dev_err(dev, "Mbox send fail %d\n", ret);
> + goto fail;
> + }
> +
> + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
> +
> + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
Same
> +
> +fail:
> + ti_sci_put_one_xfer(&info->minfo, xfer);
> +
> + return ret;
> +}
> +
> static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
> {
> struct ti_sci_info *info;
> @@ -2964,6 +3137,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
> struct ti_sci_core_ops *core_ops = &ops->core_ops;
> struct ti_sci_dev_ops *dops = &ops->dev_ops;
> struct ti_sci_clk_ops *cops = &ops->clk_ops;
> + struct ti_sci_pm_ops *pmops = &ops->pm_ops;
> struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops;
> struct ti_sci_rm_irq_ops *iops = &ops->rm_irq_ops;
> struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
> @@ -3003,6 +3177,13 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
> cops->set_freq = ti_sci_cmd_clk_set_freq;
> cops->get_freq = ti_sci_cmd_clk_get_freq;
>
> + if (info->fw_caps & MSG_FLAG_CAPS_LPM_DM_MANAGED) {
> + pr_debug("detected DM managed LPM in fw_caps\n");
> + pmops->lpm_wake_reason = ti_sci_msg_cmd_lpm_wake_reason;
> + pmops->set_device_constraint = ti_sci_cmd_set_device_constraint;
> + pmops->set_latency_constraint = ti_sci_cmd_set_latency_constraint;
> + }
> +
> rm_core_ops->get_range = ti_sci_cmd_get_resource_range;
> rm_core_ops->get_range_from_shost =
> ti_sci_cmd_get_resource_range_from_shost;
> @@ -3490,12 +3671,20 @@ static int ti_sci_resume_noirq(struct device *dev)
> {
> struct ti_sci_info *info = dev_get_drvdata(dev);
> int ret = 0;
> + u32 source;
> + u64 time;
> + u8 pin;
> + u8 mode;
>
> ret = ti_sci_cmd_set_io_isolation(&info->handle, TISCI_MSG_VALUE_IO_DISABLE);
> if (ret)
> return ret;
> dev_dbg(dev, "%s: disable isolation: %d\n", __func__, ret);
>
> + ti_sci_msg_cmd_lpm_wake_reason(&info->handle, &source, &time, &pin, &mode);
No handling of error?
> + dev_info(dev, "ti_sci: wakeup source:0x%x, pin:0x%x, mode:0x%x\n",
> + source, pin, mode);
> +
> return 0;
> }
>
[...]
>
> /**
> diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
> index 1f1871e23f76..4ba9e520a28f 100644
> --- a/include/linux/soc/ti/ti_sci_protocol.h
> +++ b/include/linux/soc/ti/ti_sci_protocol.h
> @@ -199,6 +199,47 @@ struct ti_sci_clk_ops {
> #define TISCI_MSG_VALUE_IO_ENABLE 1
> #define TISCI_MSG_VALUE_IO_DISABLE 0
>
> +/* TISCI LPM wake up sources */
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_WKUP_I2C0 0x00
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_WKUP_UART0 0x10
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_MCU_GPIO0 0x20
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_WKUP_ICEMELTER0 0x30
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_WKUP_TIMER0 0x40
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_WKUP_TIMER1 0x41
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_WKUP_RTC0 0x50
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_RESET 0x60
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_USB0 0x70
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_USB1 0x71
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_MAIN_IO 0x80
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_MCU_IO 0x81
^^ I assume these are daisy chain sources. - will these remain OR do we
have to consider the wake sources SoC dependent? If so, the
sci_protocol.h will be SoC agnostic..
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_CAN_IO 0x82
> +#define TISCI_MSG_VALUE_LPM_WAKE_SOURCE_INVALID 0xFF
> +
> +/* TISCI LPM constraint state values */
> +#define TISCI_MSG_CONSTRAINT_SET 1
> +#define TISCI_MSG_CONSTRAINT_CLR 0
> +
[...]
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
More information about the linux-arm-kernel
mailing list