[PATCH v4 3/7] arm64: dts: ti: k3-j721e-sk: Change timer nodes status to reserved

[Beleswar Padhi]

The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:

	+===================+==============+
	|  Remoteproc node  |  Timer Node  |
	+===================+==============+
	| main_r5fss0_core0 | main_timer12 |
	+-------------------+--------------+
	| main_r5fss0_core1 | main_timer13 |
	+-------------------+--------------+
	| main_r5fss1_core0 | main_timer14 |
	+-------------------+--------------+
	| main_r5fss1_core1 | main_timer15 |
	+-------------------+--------------+
	| c66_0             | main_timer0  |
	+-------------------+--------------+
	| c66_1             | main_timer1  |
	+-------------------+--------------+
	| c71_0             | main_timer2  |
	+-------------------+--------------+

Fixes: 7f209dd1267c ("arm64: dts: ti: k3-j721e: Add general purpose timers")
Signed-off-by: Beleswar Padhi <b-padhi at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 1896218fe038..046267044e68 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -1319,6 +1319,35 @@ &main_r5fss1 {
 	ti,cluster-mode = <0>;
 };
 
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer12 {
+	status = "reserved";
+};
+
+&main_timer13 {
+	status = "reserved";
+};
+
+&main_timer14 {
+	status = "reserved";
+};
+
+&main_timer15 {
+	status = "reserved";
+};
+
 &main_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-- 
2.34.1