[PATCH v3] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support
Marc Kleine-Budde
mkl at pengutronix.de
Fri Aug 23 05:36:47 PDT 2024
On 23.08.2024 17:31:57, Tarang Raval wrote:
> Add following peripherals support for the Emtop i.MX8M Mini Baseboard
>
> * Wi-Fi
> * Audio
> * SD card
> * RTC
> * CAN bus
> * USB OTG
>
> Signed-off-by: Tarang Raval <tarang.raval at siliconsignals.io>
> ---
>
> Changes in v2:
>
> 1. Updated the node name and pinctrl name.
> 2. Removed the 'regulators' container.
> 3. Removed a stray blank line.
> 4. Removed non-existent properties.
> 5. Removed unused node and pinctrl:
> -modem-reset
> -pinctrl_uart1
> 6. Defined the CAN transceiver reset GPIO separately.
>
> Change in v3:
>
> 1. Removed 'can-connector'.
> 2. Use USB connector instead of extcon_usb.
> 3. Changed id-gpio to id-gpios.
> 4. Use Level trigger IRQ in the CAN node.
> 5. Corrected the compatible property of RTC.
> 6. Added blank lines to separate the pinctrl groups.
> ---
> .../dts/freescale/imx8mm-emtop-baseboard.dts | 326 ++++++++++++++++++
> 1 file changed, 326 insertions(+)
[...]
> +/* CAN BUS */
> +&ecspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> +
> + can: can at 0 {
> + compatible = "microchip,mcp2515";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_canbus>;
> + clocks = <&osc_can>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
Have you actually tested this?
Previously there was: "interrupts = <14 IRQ_TYPE_EDGE_FALLING>;",
meaning the IRQ triggers on the edge "1 -> 0". It doesn't look correct,
if you say now there is an IRQ at level "1".
> + spi-max-frequency = <10000000>;
> + };
> };
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240823/0e0acf68/attachment.sig>
More information about the linux-arm-kernel
mailing list