[PATCH 6/7] memory: pl353-smc: simplify with dev_err_probe()

[Krzysztof Kozlowski]

Use dev_err_probe() to avoid dmesg flood on actual defer.  This makes
the code also simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 drivers/memory/pl353-smc.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 56e51737c81f..c75b99e49970 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -82,16 +82,14 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 		return -ENOMEM;
 
 	pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk");
-	if (IS_ERR(pl353_smc->aclk)) {
-		dev_err(&adev->dev, "aclk clock not found.\n");
-		return PTR_ERR(pl353_smc->aclk);
-	}
+	if (IS_ERR(pl353_smc->aclk))
+		return dev_err_probe(&adev->dev, PTR_ERR(pl353_smc->aclk),
+				     "aclk clock not found.\n");
 
 	pl353_smc->memclk = devm_clk_get(&adev->dev, "memclk");
-	if (IS_ERR(pl353_smc->memclk)) {
-		dev_err(&adev->dev, "memclk clock not found.\n");
-		return PTR_ERR(pl353_smc->memclk);
-	}
+	if (IS_ERR(pl353_smc->memclk))
+		return dev_err_probe(&adev->dev, PTR_ERR(pl353_smc->memclk),
+				     "memclk clock not found.\n");
 
 	err = clk_prepare_enable(pl353_smc->aclk);
 	if (err) {

-- 
2.43.0