[PATCH -next 2/3] media: c8sectpfe: Use for_each_child_of_node_scoped()
Jinjie Ruan
ruanjinjie at huawei.com
Fri Aug 23 02:02:16 PDT 2024
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie at huawei.com>
---
.../st/sti/c8sectpfe/c8sectpfe-core.c | 34 +++++++------------
1 file changed, 12 insertions(+), 22 deletions(-)
diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
index 67d3d6e50d2e..40ae91f65848 100644
--- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
@@ -658,7 +658,7 @@ static irqreturn_t c8sectpfe_error_irq_handler(int irq, void *priv)
static int c8sectpfe_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *child, *np = dev->of_node;
+ struct device_node *np = dev->of_node;
struct c8sectpfei *fei;
struct resource *res;
int ret, index = 0;
@@ -742,17 +742,15 @@ static int c8sectpfe_probe(struct platform_device *pdev)
return PTR_ERR(fei->pinctrl);
}
- for_each_child_of_node(np, child) {
+ for_each_child_of_node_scoped(np, child) {
struct device_node *i2c_bus;
fei->channel_data[index] = devm_kzalloc(dev,
sizeof(struct channel_info),
GFP_KERNEL);
- if (!fei->channel_data[index]) {
- ret = -ENOMEM;
- goto err_node_put;
- }
+ if (!fei->channel_data[index])
+ return -ENOMEM;
tsin = fei->channel_data[index];
@@ -761,7 +759,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
ret = of_property_read_u32(child, "tsin-num", &tsin->tsin_id);
if (ret) {
dev_err(&pdev->dev, "No tsin_num found\n");
- goto err_node_put;
+ return ret;
}
/* sanity check value */
@@ -769,8 +767,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"tsin-num %d specified greater than number\n\tof input block hw in SoC! (%d)",
tsin->tsin_id, fei->hw_stats.num_ib);
- ret = -EINVAL;
- goto err_node_put;
+ return -EINVAL;
}
tsin->invert_ts_clk = of_property_read_bool(child,
@@ -786,22 +783,20 @@ static int c8sectpfe_probe(struct platform_device *pdev)
&tsin->dvb_card);
if (ret) {
dev_err(&pdev->dev, "No dvb-card found\n");
- goto err_node_put;
+ return ret;
}
i2c_bus = of_parse_phandle(child, "i2c-bus", 0);
if (!i2c_bus) {
dev_err(&pdev->dev, "No i2c-bus found\n");
- ret = -ENODEV;
- goto err_node_put;
+ return -ENODEV;
}
tsin->i2c_adapter =
of_find_i2c_adapter_by_node(i2c_bus);
if (!tsin->i2c_adapter) {
dev_err(&pdev->dev, "No i2c adapter found\n");
of_node_put(i2c_bus);
- ret = -ENODEV;
- goto err_node_put;
+ return -ENODEV;
}
of_node_put(i2c_bus);
@@ -814,7 +809,7 @@ static int c8sectpfe_probe(struct platform_device *pdev)
if (ret && ret != -EBUSY) {
dev_err(dev, "Can't request tsin%d reset gpio\n",
fei->channel_data[index]->tsin_id);
- goto err_node_put;
+ return ret;
}
if (!ret) {
@@ -856,10 +851,6 @@ static int c8sectpfe_probe(struct platform_device *pdev)
c8sectpfe_debugfs_init(fei);
return 0;
-
-err_node_put:
- of_node_put(child);
- return ret;
}
static void c8sectpfe_remove(struct platform_device *pdev)
@@ -898,16 +889,15 @@ static void c8sectpfe_remove(struct platform_device *pdev)
static int configure_channels(struct c8sectpfei *fei)
{
int index = 0, ret;
- struct device_node *child, *np = fei->dev->of_node;
+ struct device_node *np = fei->dev->of_node;
/* iterate round each tsin and configure memdma descriptor and IB hw */
- for_each_child_of_node(np, child) {
+ for_each_child_of_node_scoped(np, child) {
ret = configure_memdma_and_inputblock(fei,
fei->channel_data[index]);
if (ret) {
dev_err(fei->dev,
"configure_memdma_and_inputblock failed\n");
- of_node_put(child);
goto err_unmap;
}
index++;
--
2.34.1
More information about the linux-arm-kernel
mailing list