[PATCH v3] arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIe

Benjamin Hahn B.Hahn at phytec.de
Fri Aug 23 01:01:32 PDT 2024


Add support for the Mini PCIe slot.

Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
---
Changes in v3:
- change order of properties for pcie phy node
- Link to v2: https://lore.kernel.org/r/20240821-wip-bhahn-add_pcie_support-v2-1-9c92d8488ab2@phytec.de

Changes in v2:
- change pcie regulator to reg_vcc_3v3_sw
- add wake gpio to pcie pinctrl and order the gpios
- Link to v1: https://lore.kernel.org/r/20240813-wip-bhahn-add_pcie_support-v1-1-c1bb062b4e1f@phytec.de
---
 .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts   | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 00a240484c25..bea479b5203a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/leds/leds-pca9532.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mp-phycore-som.dtsi"
@@ -195,6 +196,23 @@ &snvs_pwrkey {
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,clkreq-unsupported;
+	status = "okay";
+};
+
+/* Mini PCIe */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_vcc_3v3_sw>;
+	status = "okay";
+};
+
 &pwm3 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -366,6 +384,15 @@ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x12
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10     0x60
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14     0x40
+		>;
+	};
+
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x12

---
base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
change-id: 20240813-wip-bhahn-add_pcie_support-b9bd75fc4d98

Best regards,
-- 
Benjamin Hahn <B.Hahn at phytec.de>




More information about the linux-arm-kernel mailing list