[PATCH] PCI: armada8k: change to use devm_clk_get_enabled() helpers

[Anand Moon]

Hi Wu Bo,

On Thu, 22 Aug 2024 at 15:51, Wu Bo <bo.wu at vivo.com> wrote:
>
> Make the code cleaner and avoid call clk_disable_unprepare()
>
> Signed-off-by: Wu Bo <bo.wu at vivo.com>
> ---
>  drivers/pci/controller/dwc/pcie-armada8k.c | 29 ++++++----------------
>  1 file changed, 7 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
> index b5c599ccaacf..48009098fa6b 100644
> --- a/drivers/pci/controller/dwc/pcie-armada8k.c
> +++ b/drivers/pci/controller/dwc/pcie-armada8k.c
> @@ -284,36 +284,25 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
>         pcie->pci = pci;
>
> -       pcie->clk = devm_clk_get(dev, NULL);
> +       pcie->clk = devm_clk_get_enabled(dev, NULL);
>         if (IS_ERR(pcie->clk))
>                 return PTR_ERR(pcie->clk);
I feel you can use  return dev_err_probe(dev, PTR_ERR((pcie->clk);
>
> -       ret = clk_prepare_enable(pcie->clk);
> -       if (ret)
> -               return ret;
> -
> -       pcie->clk_reg = devm_clk_get(dev, "reg");
> -       if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER)) {
> -               ret = -EPROBE_DEFER;
> -               goto fail;
> -       }
> -       if (!IS_ERR(pcie->clk_reg)) {
> -               ret = clk_prepare_enable(pcie->clk_reg);
> -               if (ret)
> -                       goto fail_clkreg;
> -       }
> +       pcie->clk_reg = devm_clk_get_enabled(dev, "reg");
> +       if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER))
> +               return -EPROBE_DEFER;
>
  same here dev_err_probe(dev, PTR_ERR((pcie->clk_reg));

>         /* Get the dw-pcie unit configuration/control registers base. */
>         base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
>         pci->dbi_base = devm_pci_remap_cfg_resource(dev, base);
>         if (IS_ERR(pci->dbi_base)) {
>                 ret = PTR_ERR(pci->dbi_base);
> -               goto fail_clkreg;
> +               goto out;
>         }
>
>         ret = armada8k_pcie_setup_phys(pcie);
>         if (ret)
> -               goto fail_clkreg;
> +               goto out;
>
>         platform_set_drvdata(pdev, pcie);
>
> @@ -325,11 +314,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
>  disable_phy:
>         armada8k_pcie_disable_phys(pcie);
> -fail_clkreg:
> -       clk_disable_unprepare(pcie->clk_reg);
> -fail:
> -       clk_disable_unprepare(pcie->clk);
> -
> +out:
>         return ret;
>  }
>
Thanks

-Anand
> --
> 2.25.1
>
>