[PATCH net-next v2 6/7] net: ti: icssg-prueth: Add multicast filtering support in HSR mode
MD Danish Anwar
danishanwar at ti.com
Wed Aug 21 22:56:49 PDT 2024
On 21/08/24 5:40 pm, Roger Quadros wrote:
>
>
> On 13/08/2024 10:42, MD Danish Anwar wrote:
>> Add support for multicast filtering in HSR mode
>>
>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>> ---
>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 38 +++++++++++++++++++-
>> 1 file changed, 37 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> index b32a2bff34dc..521e9f914459 100644
>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>> @@ -490,6 +490,36 @@ static int icssg_prueth_del_mcast(struct net_device *ndev, const u8 *addr)
>> return 0;
>> }
>>
>> +static int icssg_prueth_hsr_add_mcast(struct net_device *ndev, const u8 *addr)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + struct prueth *prueth = emac->prueth;
>> +
>> + icssg_fdb_add_del(emac, addr, prueth->default_vlan,
>> + ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>> + ICSSG_FDB_ENTRY_P1_MEMBERSHIP |
>> + ICSSG_FDB_ENTRY_P2_MEMBERSHIP |
>> + ICSSG_FDB_ENTRY_BLOCK, true);
>> +
>> + icssg_vtbl_modify(emac, emac->port_vlan, BIT(emac->port_id),
>> + BIT(emac->port_id), true);
>> + return 0;
>> +}
>> +
>> +static int icssg_prueth_hsr_del_mcast(struct net_device *ndev, const u8 *addr)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + struct prueth *prueth = emac->prueth;
>> +
>> + icssg_fdb_add_del(emac, addr, prueth->default_vlan,
>> + ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>> + ICSSG_FDB_ENTRY_P1_MEMBERSHIP |
>> + ICSSG_FDB_ENTRY_P2_MEMBERSHIP |
>> + ICSSG_FDB_ENTRY_BLOCK, false);
>> +
>> + return 0;
>> +}
>> +
>> /**
>> * emac_ndo_open - EMAC device open
>> * @ndev: network adapter device
>> @@ -651,6 +681,7 @@ static int emac_ndo_stop(struct net_device *ndev)
>> icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
>>
>> __dev_mc_unsync(ndev, icssg_prueth_del_mcast);
>
> Above unsync call will already remove all MC addresses so nothing
> is left to unsync in the below unsync call.
>> + __dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast);
>
> Do you have to use an if/else like you do while calling __dev_mc_sync?
>
Yes Roger, we will need and if/else here and remove MC addresses based
on the current mode.
if (emac->prueth->is_hsr_offload_mode)
__dev_mc_unsync(ndev, icssg_prueth_hsr_del_mcast);
else
__dev_mc_unsync(ndev, icssg_prueth_del_mcast);
I will make this change and update the series.
>>
>> atomic_set(&emac->tdown_cnt, emac->tx_ch_num);
>> /* ensure new tdown_cnt value is visible */
>> @@ -728,7 +759,12 @@ static void emac_ndo_set_rx_mode_work(struct work_struct *work)
>> return;
>> }
>>
>> - __dev_mc_sync(ndev, icssg_prueth_add_mcast, icssg_prueth_del_mcast);
>> + if (emac->prueth->is_hsr_offload_mode)
>> + __dev_mc_sync(ndev, icssg_prueth_hsr_add_mcast,
>> + icssg_prueth_hsr_del_mcast);
>> + else
>> + __dev_mc_sync(ndev, icssg_prueth_add_mcast,
>> + icssg_prueth_del_mcast);
>> }
>>
>> /**
>
--
Thanks and Regards,
Danish
More information about the linux-arm-kernel
mailing list