[PATCH v4 3/5] arm64: dts: ti: k3-am68*: Add bootph-* properties

[Kumar, Udit]

On 8/14/2024 1:17 PM, Manorit Chawdhry wrote:
> Adds bootph-* properties to the leaf nodes to enable bootloaders to
> utilise them.
>
> Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 11 +++++++++++
>   arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi       |  5 +++--
>   2 files changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> index 90dbe31c5b81..e7dd31b49081 100644
> --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> @@ -184,6 +184,7 @@ main_uart8_pins_default: main-uart8-default-pins {
>   			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
>   			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
>   		>;
> +		bootph-all;
>   	};


Reviewed-by: Udit Kumar <u-kumar1 at ti.com>

>   
>   	main_i2c0_pins_default: main-i2c0-default-pins {
> @@ -210,6 +211,7 @@ J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
>   			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
>   			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
>   		>;
> [..]